A

  • A356 Alloy Optimization of Casting Conditions for Semi-Solid A356 Aluminum Alloy [Volume 10, Issue 1, 2019, Page 44-53]

  • Abu A New Separation, Fractionation and Improving of Abu- Aljeer Asphalt [Volume 7, Issue 1, 2016, Page 31-41]

  • Accelerated life test Proportional Odds Nonparametric Accelerated Life Test for Reliability Prediction: An overview [Volume 5, Issue 1, 2012, Page 31-40]

  • Acoustic isolation Effect of Using Palm Wastes as Additive to Unsaturated Polyester on the Thermal and Acoustic Isolation Properties of a Composite Materials [Volume 9, Issue 1, 2018, Page 202-209]

  • Activated Sludge The Study of Temperature Effects On Activated Sludge Stability and it’s Dewaterability by using bioelectricity cell as a treatment unit. [Volume 5, Issue 2, 2012, Page 295-310]

  • Additives Modification of Asphalt Mixture Performance by Rubber-Silicone Additive [Volume 2, Issue 1, 2009, Page 71-81]

  • Admixture Re-using The By-product of Cement Industry (Cement Kiln Dust) To Produce The Concrete [Volume 3, Issue 2, 2010, Page 1-14]

  • Admixtures Effect of Admixture Type on Compressive Strength and Modulus of Elasticity of Rubber- Tire - Waste Concrete [Volume 1, Issue 1, 2008, Page 88-103]

  • Aerobic and anaerobic treatment The Study of Temperature Effects On Activated Sludge Stability and it’s Dewaterability by using bioelectricity cell as a treatment unit. [Volume 5, Issue 2, 2012, Page 295-310]

  • Aerodynamic characteristics Theoretical and Experimental Study of a Forward Swept Wing [Volume 3, Issue 2, 2010, Page 15-30]

  • AHP Develop QFD and AHP Models for Liquid Gas Valve for Product Developmen [Volume 11, Issue 1, 2020, Page 25-32]

  • AHP Decision Making in Materials Selection: an Integrated Approach with AHP [Volume 10, Issue 2, 2019, Page 399-407]

  • AHP Integration Environmental Aspects onto Customer Requirement to Develop Green Quality Function Deployment [Volume 11, Issue 1, 2020, Page 66-78]

  • Air Condition Decision Making in Materials Selection: an Integrated Approach with AHP [Volume 10, Issue 2, 2019, Page 399-407]

  • Aljeer A New Separation, Fractionation and Improving of Abu- Aljeer Asphalt [Volume 7, Issue 1, 2016, Page 31-41]

  • Al- Thawra Assessment Performance at Al- Thawra Signalized Intersection in Babil City [Volume 13, Issue 2, 2022, Page 84-90]

  • Alum Evaluation and treatment of waste water effect on groundwater quality (the University of Anbar area as a case study) [Volume 12, Issue 2, 2021, Page 139-145]

  • Aluminum Alloy Effect of SiC Addition the on Adhesive Wear Resistance of 6061 T6 Aluminum Alloy [Volume 5, Issue 2, 2012, Page 271-278]

  • Al-Wand Dam Analysis of seepage through Al-Wand Dam by using SEEP/W ModelAnalysis of seepage through Al-Wand Dam by using SEEP/W Model [Volume 11, Issue 1, 2020, Page 33-37]

  • Analytic hierarchy proces Decision Making in Materials Selection: an Integrated Approach with AHP [Volume 10, Issue 2, 2019, Page 399-407]

  • Anbar University A proposed plan for implementing the public transport policy in the city of Ramadi / Anbar University as a model [Volume 12, Issue 1, 2021, Page 90-99]

  • Anchorage Length Effect of Anchorage Length on the Shear Capacity of High Strength Concrete Deep Beams [Volume 12, Issue 1, 2021, Page 47-56]

  • ANN ANN Based Detection and Location of Severe Three Phase Trip on the Transmission Lines of an Uncontrolled Power System [Volume 2, Issue 1, 2009, Page 36-48]

  • ANN Investigation of Milling Parameters Effect on Material Removal Rate Using Taguchi and Artificial Neural Network Techniques [Volume 10, Issue 1, 2019, Page 83-88]

  • ANN Evaluate the granite waste efficiency in the construction using statistical indicators [Volume 14, Issue 1, 2023, Page 66-72]

  • Annulus heat exchanger Performance of a double-pipe heat exchanger with different met-al foam arrangements [Volume 12, Issue 2, 2021, Page 100-112]

  • Annulus Sector A Numerical Study of Buoyancy Effect on Thermal Development in a Horizontal Annulus Sector [Volume 2, Issue 2, 2009, Page 95-116]

  • ANOVA Investigation of Milling Parameters Effect on Material Removal Rate Using Taguchi and Artificial Neural Network Techniques [Volume 10, Issue 1, 2019, Page 83-88]

  • ANOVA Study the effects of milling parameters on surface roughness for Low Carbon Steel AISI 1015 [Volume 14, Issue 1, 2023, Page 1-6]

  • ANOVA Analysis Investigation of Surface Quality in Bezier Technique for Machining Al7025 Alloy Using CNC Turning [Volume 14, Issue 2, 2023, Page 1-11]

  • ANSYS TAIL PLANE DESIGN FOR SATISFYING LONGITUDINAL HANDLING QUALITIES [Volume 1, Issue 2, 2008, Page 1-14]

  • ANSYS Effect of Cutouts on the Behavior of Clamped Rectangular Plates [Volume 4, Issue 2, 2011, Page 45-59]

  • ANSYS FREE VIBRATION ANALYSIS OF A CANTILEVER CRACKED BEAM WITH SUBSTRUCTURE ATTACHMENT [Volume 1, Issue 2, 2008, Page 39-50]

  • ANSYS Transient Analysis of Composite Plates with Different Types of Cutout [Volume 5, Issue 1, 2012, Page 1-21]

  • AODV Performance Evaluation of AODV Routing Protocol in MANET using OPNET Simulator [Volume 5, Issue 2, 2012, Page 241-257]

  • Arc GIS Hydraulic Analysis study and redesign of the water distribution system simulation using GIS- EPANET, case study: Laylan sub-district, Kirkuk city, Iraq [Volume 15, Issue 1, 2024, Page 1-16]

  • Arduino Controller The effect of a controlled cooling system on the solar array of DC air conditioner [Volume 11, Issue 2, 2020, Page 113-120]

  • Arm Robot Kinematic Workspace Modelling of Two Links Robotic Manipulator [Volume 11, Issue 1, 2020, Page 19-24]

  • Artificial Neural Network Investigation of Milling Parameters Effect on Material Removal Rate Using Taguchi and Artificial Neural Network Techniques [Volume 10, Issue 1, 2019, Page 83-88]

  • Artificial Neural Network Model Prediction of Surface Quality in Electrical Discharge Machining Process for 7024 AL Alloy Using Artificial Neural Network Model [Volume 13, Issue 2, 2022, Page 106-113]

  • Asphalt layers Rutting Performance of Asphalt Layers Mixtures with Inclusion RAP Materials [Volume 12, Issue 2, 2021, Page 203-210]

  • Asphalt Mix Use White Cement Kiln Dust As A Mineral Filler In Asphalt Mixture [Volume 7, Issue 1, 2016, Page 50-55]

  • Asphalt Mixture Modification of Asphalt Mixture Performance by Rubber-Silicone Additive [Volume 2, Issue 1, 2009, Page 71-81]

  • Asphalt pavement Investigating the Service life of asphalt pavement in a sample of Ramadi district roads [Volume 8, Issue 1, 2017, Page 169-175]

  • ASR Study of Some Durability Properties of Self-compacting Concrete Containing Waste Polyethylene Terephthalate [Volume 14, Issue 1, 2023, Page 15-30]

  • Auditorium TAIL PLANE DESIGN FOR SATISFYING LONGITUDINAL HANDLING QUALITIES [Volume 1, Issue 2, 2008, Page 1-14]

  • Auditorium STUDING THE PRINCIPAL VARIABLES AT THE AUDITORIUM ROOMS TO SPECIFY THE COUSTIC PERFORMANCE EFFECIENCY [Volume 1, Issue 2, 2008, Page 163-179]

  • Automating Preparing a PLC Program for the Kiln Entrance of Ceramic [Volume 2, Issue 2, 2009, Page 82-94]

  • Automotive engine Enhancing the effectiveness of the cooling system for automotive engine by employing different nanofluids: literature review [Volume 13, Issue 1, 2022, Page 53-58]

  • Availability Estimating Optimum Period of Time Between Maintenances by Using Monte Carlo Simulation Method [Volume 5, Issue 2, 2012, Page 226-240]

  • Availability Evaluation of Overall Resource Effectiveness for Job Shop Production System [Volume 10, Issue 2, 2019, Page 362-371]

  • AWGN A Proposed Improvement Model for MC-CDMA in Selective Fading Channel [Volume 2, Issue 1, 2009, Page 1-10]

  • Axial compressor Design and Performance Prediction of an Axial Flow Compressor [Volume 5, Issue 2, 2012, Page 209-225]

B

  • Bending Strength EFFECT OF ADDING RECYCLED PLASTIC FIBERS TO CONCRETE ON THE STATIC PROPERTIES OF CONCRETE TILES [Volume 11, Issue 1, 2020, Page 53-59]

  • BER A Proposed Improvement Model for MC-CDMA in Selective Fading Channel [Volume 2, Issue 1, 2009, Page 1-10]

  • Binder Evaluate the granite waste efficiency in the construction using statistical indicators [Volume 14, Issue 1, 2023, Page 66-72]

  • Biocompatible Compression and Wear Properties of Biocompatible Commercially Pure Titanium and (Titanium-Silicon) Alloys [Volume 10, Issue 1, 2019, Page 54-60]

  • Bioelectricity cell The Study of Temperature Effects On Activated Sludge Stability and it’s Dewaterability by using bioelectricity cell as a treatment unit. [Volume 5, Issue 2, 2012, Page 295-310]

  • Blast TAIL PLANE DESIGN FOR SATISFYING LONGITUDINAL HANDLING QUALITIES [Volume 1, Issue 2, 2008, Page 1-14]

  • Blast ANALYSIS OF MULTI-LAYER COMPOSITE SIMPLY SUPPORTED BEAM UNDER BLAST LOADING [Volume 1, Issue 2, 2008, Page 98-117]

  • Bond Utilitarian Dimension For The Relationship of The Individual (Designer)and The Requirements of The Community [Volume 4, Issue 1, 2011, Page 107-130]

  • Bond slip Numerical Investigations of Bond-Slip Performance in Pull-Out High Strength Concrete Specimens Subjected to Elevated [Volume 12, Issue 1, 2021, Page 20-28]

  • Breakdown Evaluation of Overall Resource Effectiveness for Job Shop Production System [Volume 10, Issue 2, 2019, Page 362-371]

  • Breakdown voltage Modify the Performance of Electrical Transformer by Analysis Oil Aged and Paper Insulation with Nanoparticales [Volume 10, Issue 2, 2019, Page 372-381]

  • Broad band Performance Study of Broadband and a Dual-Band Antenna- Array of Telecommunication Systems [Volume 13, Issue 2, 2022, Page 74-83]

  • Buoyancy Effect A Numerical Study of Buoyancy Effect on Thermal Development in a Horizontal Annulus Sector [Volume 2, Issue 2, 2009, Page 95-116]

  • Burst Pressure Prediction of First Ply Failure of Composite Pressure Vessels Under Internal Pressure: A review [Volume 13, Issue 1, 2022, Page 76-84]

  • Buttress dam OPTIMUM DESIGN OF BUTTRESS DAM USING GENETIC ALGORITHM [Volume 14, Issue 2, 2023, Page 40-52]

C

  • CAD Feed-Interval Scallop Height Estimation Using Multi-axis CNC Milling Machine [Volume 5, Issue 1, 2012, Page 51-63]

  • California Bearing Ratio Use of waste stone powder to improve performance of problematic soils - A Review. [Volume 14, Issue 2, 2023, Page 27-39]

  • Cantilever Composite Beams Study of Multi-Cracked Cantilever Composite Beams Subjected to External Moving Load [Volume 10, Issue 1, 2019, Page 27-34]

  • Capacity Evaluation and Improvement of Traffic Operation for Al-Zeoat Intersection in Al-Ramadi City [Volume 3, Issue 2, 2010, Page 46-57]

  • Casting conditions Optimization of Casting Conditions for Semi-Solid A356 Aluminum Alloy [Volume 10, Issue 1, 2019, Page 44-53]

  • CBR The Effect of CKD and RAP on the Mechanical Properties of Subgrade Soils [Volume 13, Issue 1, 2022, Page 98-107]

  • CDMA A Proposed Improvement Model for MC-CDMA in Selective Fading Channel [Volume 2, Issue 1, 2009, Page 1-10]

  • Cellulose fibers Preparation a Composite Material (UP/Cann F) with Evaluation Its Toughness Under the Influence of Temperature and Humidity. [Volume 5, Issue 2, 2012, Page 198-208]

  • Cement The Effect Of Sodium Hydroxide On The Strength Of Kirkuk Soil – Cement Mixtures [Volume 5, Issue 2, 2012, Page 258-270]

  • Cement kiln dust Re-using The By-product of Cement Industry (Cement Kiln Dust) To Produce The Concrete [Volume 3, Issue 2, 2010, Page 1-14]

  • Cement kiln dust Modification of (Hiet-Abojeer) Asphalt Properties Using Wastes of Cement and Fertilizer Plant to Increase Area of Its Application [Volume 4, Issue 1, 2011, Page 153-174]

  • Cement kiln dust The Effect of CKD and RAP on the Mechanical Properties of Subgrade Soils [Volume 13, Issue 1, 2022, Page 98-107]

  • Cement wall board Experimental Investigation of Heat Reduction through Walls Using Phase Change Material [Volume 9, Issue 1, 2018, Page 245-251]

  • Cement Waste Use White Cement Kiln Dust As A Mineral Filler In Asphalt Mixture [Volume 7, Issue 1, 2016, Page 50-55]

  • Ceramic Materials Effect of Fire Clay Powder on The Properties of Ceramic Materials Produced by Using Kaolin [Volume 3, Issue 2, 2010, Page 72-77]

  • CFD study Numerical Investigation of Hydraulic-Thermal Performance for a Double-Pipe Heat Exchanger Equipped with 45°-Helical Ribs [Volume 12, Issue 2, 2021, Page 193-202]

  • CFRP Torsional Behavior of Strengthened Reinforced Concrete Beams by CFRP Sheets: Parametric study [Volume 12, Issue 2, 2021, Page 229-244]

  • CFRP Strengthening Reinforced Beams Subjected to Pure Torsion by Near Surface Mounted Rebars [Volume 13, Issue 1, 2022, Page 13-22]

  • Change over Evaluation of Overall Resource Effectiveness for Job Shop Production System [Volume 10, Issue 2, 2019, Page 362-371]

  • Chiller REVIEW ON COOLING METHOD OF GAS TURBINE POWER PLANT [Volume 14, Issue 1, 2023, Page 40-49]

  • Chloride Study of Some Durability Properties of Self-compacting Concrete Containing Waste Polyethylene Terephthalate [Volume 14, Issue 1, 2023, Page 15-30]

  • Classification Detection of Obesity Stages Using Machine Learning Algorithms [Volume 14, Issue 1, 2023, Page 80-88]

  • Clay Unmodified and Organo-Modified clay content effect on Mechanical and Thermal Properties of the Waste Low Density Polyethylene [Volume 8, Issue 1, 2017, Page 140-147]

  • Clay Core Analysis of seepage through Al-Wand Dam by using SEEP/W ModelAnalysis of seepage through Al-Wand Dam by using SEEP/W Model [Volume 11, Issue 1, 2020, Page 33-37]

  • Clayey and Sandy soils Investigation of Clayey and Sandy Soil Characteristics Polluted with Crude Oil [Volume 12, Issue 1, 2021, Page 100-107]

  • Clay soil The Effect Of Sodium Hydroxide On The Strength Of Kirkuk Soil – Cement Mixtures [Volume 5, Issue 2, 2012, Page 258-270]

  • CNC milling machine Feed-Interval Scallop Height Estimation Using Multi-axis CNC Milling Machine [Volume 5, Issue 1, 2012, Page 51-63]

  • CNC turning Investigation of Surface Quality in Bezier Technique for Machining Al7025 Alloy Using CNC Turning [Volume 14, Issue 2, 2023, Page 1-11]

  • Coagulation Evaluation and treatment of waste water effect on groundwater quality (the University of Anbar area as a case study) [Volume 12, Issue 2, 2021, Page 139-145]

  • Cohesion The Effect Of Sodium Hydroxide On The Strength Of Kirkuk Soil – Cement Mixtures [Volume 5, Issue 2, 2012, Page 258-270]

  • Column Effect of Duration and Intensity of Burning on Columns Exposure to Cyclic Fire [Volume 13, Issue 2, 2022, Page 91-98]

  • Communication Review of modern applications of solar cells in communication systems [Volume 13, Issue 2, 2022, Page 133-146]

  • Communication Systems Performance Study of Broadband and a Dual-Band Antenna- Array of Telecommunication Systems [Volume 13, Issue 2, 2022, Page 74-83]

  • Community technology Utilitarian Dimension For The Relationship of The Individual (Designer)and The Requirements of The Community [Volume 4, Issue 1, 2011, Page 107-130]

  • Composite Materials Preparation a Composite Material (UP/Cann F) with Evaluation Its Toughness Under the Influence of Temperature and Humidity. [Volume 5, Issue 2, 2012, Page 198-208]

  • Composite Materials Effect of water on impact strength for unsaturated polyester composites reinforced with E-glass fibers [Volume 5, Issue 2, 2012, Page 279-294]

  • Composite Pressure Vessels (CPVs) Prediction of First Ply Failure of Composite Pressure Vessels Under Internal Pressure: A review [Volume 13, Issue 1, 2022, Page 76-84]

  • Composite slab STRUCTURAL BEHAVIOR OF COMPOSITE SLABS SUBJECTED TO IMPACT LOADING [Volume 8, Issue 1, 2017, Page 176-184]

  • Compression Compression and Wear Properties of Biocompatible Commercially Pure Titanium and (Titanium-Silicon) Alloys [Volume 10, Issue 1, 2019, Page 54-60]

  • Compressive Strength Study Some Mechanical Properties of Mortar with Sawdust as a Partially Replacement of Sand [Volume 5, Issue 1, 2012, Page 22-30]

  • Concatenation Codes Performance Analysis of Serial Concatenation Convolutional Codes Based on Amplitude Matrix [Volume 2, Issue 2, 2009, Page 1-16]

  • Concentrated solar power Practical Investigation for Improving Concentrating Solar Power Stations Efficiency in Iraqi Weathers [Volume 5, Issue 1, 2012, Page 76-87]

  • Concen-tric annular gap Numerical Investigation of Hydraulic-Thermal Performance for a Double-Pipe Heat Exchanger Equipped with 45°-Helical Ribs [Volume 12, Issue 2, 2021, Page 193-202]

  • Concrete Re-using The By-product of Cement Industry (Cement Kiln Dust) To Produce The Concrete [Volume 3, Issue 2, 2010, Page 1-14]

  • Concrete A proposed new formula to determine the sound insulation of concrete walls [Volume 2, Issue 2, 2009, Page 117-128]

  • Concrete Comprehensive review study for the effect of utilizing waste materials on the thermal conductivity of concretes [Volume 12, Issue 2, 2021, Page 113-120]

  • Concrete Effect of Duration and Intensity of Burning on Columns Exposure to Cyclic Fire [Volume 13, Issue 2, 2022, Page 91-98]

  • Concrete buildings Progressive Collapse Analyses of Buildings Subjected to Earthquake Loads [Volume 12, Issue 1, 2021, Page 10-19]

  • Concrete Mixing Suggested Method To Dealing With Site Course Aggregate To Product Best Concrete [Volume 2, Issue 1, 2009, Page 96-111]

  • Constant surface temperature A Numerical Study of Buoyancy Effect on Thermal Development in a Horizontal Annulus Sector [Volume 2, Issue 2, 2009, Page 95-116]

  • Constant surface temperature On the Effect of Flow Direction on Mixed Convection from a Horizontal Cylinder in a Saturated Porous Medium [Volume 1, Issue 1, 2008, Page 77-87]

  • Construction Projects Identifying key factors affecting of the projects objectives in Baghdad Province by using experts interview technique [Volume 13, Issue 1, 2022, Page 59-64]

  • Contamination Investigation of Clayey and Sandy Soil Characteristics Polluted with Crude Oil [Volume 12, Issue 1, 2021, Page 100-107]

  • Contemporary Arabic Architecture Contemporary Arabic ArchitectureAnd It’s Local Specialism [Volume 3, Issue 2, 2010, Page 125-144]

  • Control delay Assessment Performance at Al- Thawra Signalized Intersection in Babil City [Volume 13, Issue 2, 2022, Page 84-90]

  • Convection heat transfer Numerical Investigation on the Thermal Performance of Double Pipe Heat Exchanger Using Different Shapes of Fins [Volume 10, Issue 2, 2019, Page 326-348]

  • Cooling Methods Methodologies Employed to Cool Photovoltaic Modules for Enhancing Efficiency: A Review [Volume 13, Issue 2, 2022, Page 49-62]

  • Cooling Photovoltaic The effect of a controlled cooling system on the solar array of DC air conditioner [Volume 11, Issue 2, 2020, Page 113-120]

  • Cooling Tower Experimental study on thermal performance of counter flow wet cooling tower and effect of fins angle [Volume 10, Issue 1, 2019, Page 1-8]

  • Corrosion control A Review on Recent Techniques for Boiler Tubes Corrosion Protection and Fouling Mitigation Using PLC [Volume 11, Issue 2, 2020, Page 184-191]

  • Cosmetic surgery Using Deep-Learning Algorithm to Determining safe areas for Injecting Cosmetic Fluids into The Face: A survey [Volume 14, Issue 1, 2023, Page 73-79]

  • Course Aggregates Suggested Method To Dealing With Site Course Aggregate To Product Best Concrete [Volume 2, Issue 1, 2009, Page 96-111]

  • Crack TAIL PLANE DESIGN FOR SATISFYING LONGITUDINAL HANDLING QUALITIES [Volume 1, Issue 2, 2008, Page 1-14]

  • Crack FREE VIBRATION ANALYSIS OF A CANTILEVER CRACKED BEAM WITH SUBSTRUCTURE ATTACHMENT [Volume 1, Issue 2, 2008, Page 39-50]

  • Cracked Beams Dynamic Response of a Cracked Composite Beam subjected to moving Load [Volume 10, Issue 2, 2019, Page 393-398]

  • CRC beam Torsional Capacity of Composite Reinforced Concrete Beams with Stirrup Connectors [Volume 12, Issue 2, 2021, Page 177-192]

  • Creep Time-dependent Numerical Modeling of Plain Concrete Columns Wrapped by FRP Sheets [Volume 9, Issue 1, 2018, Page 267-280]

  • Creep The Optimum Priorities In Improving The Infrastructure Of Al-Anbar Governorate Road Network Using R.S. Data, GIS And Graph Theory [Volume 9, Issue 1, 2018, Page 281-299]

  • Cross Rolling Effect of Cross- Rolling on Mechanical Properties and Spring - Back of Aluminum 6061 Alloy [Volume 14, Issue 2, 2023, Page 12-18]

  • Cryogenic Treatment Mechanical Properties of Welded Martensitic Stainless Steel (AISI420) Subject to Different Heat Treatment [Volume 11, Issue 1, 2020, Page 12-18]

  • Cryptography Unconditionally Secure Authentication in Quantum Key Distribution [Volume 1, Issue 1, 2008, Page 59-76]

  • CuO/H2O nano fluids Artificial Neural Networks Modeling of Heat Transfer Characteris-tics in a Parabolic Trough Solar Collector using Nano-Fluids [Volume 12, Issue 2, 2021, Page 245-255]

  • Cutting A Neural Network Cutting Fluid Effect on Surface Roughness and Tool Life [Volume 4, Issue 1, 2011, Page 34-46]

  • Cyclic Torque Cyclic Torsion Behavior of Prestressed Concrete Beams [Volume 9, Issue 1, 2018, Page 233-244]

D

  • Dam Operation Dam and Reservoir System Management based on Genetic Algorithms [Volume 13, Issue 1, 2022, Page 46-52]

  • Dc Air Conditioner The effect of a controlled cooling system on the solar array of DC air conditioner [Volume 11, Issue 2, 2020, Page 113-120]

  • Dc Brushless Compressor And Test The effect of a controlled cooling system on the solar array of DC air conditioner [Volume 11, Issue 2, 2020, Page 113-120]

  • DC drive Design and Implementing of a Buck Dc-To-Dc Converter into the DC Motor's Speed Controller in Matlab/Simulink [Volume 13, Issue 2, 2022, Page 36-41]

  • DC motor Fuzzy Model Reference Adaptive Controller for DC Motor [Volume 8, Issue 1, 2017, Page 107-112]

  • DC motor Design and Implementing of a Buck Dc-To-Dc Converter into the DC Motor's Speed Controller in Matlab/Simulink [Volume 13, Issue 2, 2022, Page 36-41]

  • Decimation in frequency(DIF) Direct Algorithm for Computation of Inverse Real Fast Fourier Transform (IRDFT) [Volume 14, Issue 2, 2023, Page 19-27]

  • Deep Beam Effect of Anchorage Length on the Shear Capacity of High Strength Concrete Deep Beams [Volume 12, Issue 1, 2021, Page 47-56]

  • Deep learning algorithms Using Deep-Learning Algorithm to Determining safe areas for Injecting Cosmetic Fluids into The Face: A survey [Volume 14, Issue 1, 2023, Page 73-79]

  • Degassing Effect of Adding Degassing (Ar-N2) on Hardness and Microstructure of Recycling Aluminum Cans [Volume 11, Issue 1, 2020, Page 38-42]

  • Delay Evaluation and Improvement of Traffic Operation for Al-Zeoat Intersection in Al-Ramadi City [Volume 3, Issue 2, 2010, Page 46-57]

  • Delta Effect of Delta–Winglet Vortex Generators on a Forced Convection Heat Transfer in an Asymmetrically Heated Triangular Duct [Volume 1, Issue 1, 2008, Page 31-44]

  • Density Speed Flow Density Models Prediction for Urban Roadway in Falluja City [Volume 4, Issue 1, 2011, Page 1-16]

  • Density Studying the Factors effect on Separation of Two Solid Equivalent Particle According to Density and Determination the best Separation Point [Volume 13, Issue 2, 2022, Page 22-35]

  • Density Effect of Natural Fibers from Palm Fronds on The Mechanical Properties of Concrete [Volume 13, Issue 2, 2022, Page 69-73]

  • DES Modified Key Model of Data Encryption Standard [Volume 3, Issue 1, 2010, Page 20-33]

  • Design of experiments Optimization of Casting Conditions for Semi-Solid A356 Aluminum Alloy [Volume 10, Issue 1, 2019, Page 44-53]

  • Detection ANN Based Detection and Location of Severe Three Phase Trip on the Transmission Lines of an Uncontrolled Power System [Volume 2, Issue 1, 2009, Page 36-48]

  • Deterioration Effect of Polymer SBR on Strength Reduction in Concrete Immersed in Drainage and Ground Water [Volume 12, Issue 2, 2021, Page 168-176]

  • Dielectric constant Modify the Performance of Electrical Transformer by Analysis Oil Aged and Paper Insulation with Nanoparticales [Volume 10, Issue 2, 2019, Page 372-381]

  • Dif-ferent airfoils Optimum performance of rotor blade with different airfoil for Primus Wind power AIR 40 Wind Turbine 12VDC [Volume 12, Issue 1, 2021, Page 57-64]

  • Different moisture content Suggested Method To Dealing With Site Course Aggregate To Product Best Concrete [Volume 2, Issue 1, 2009, Page 96-111]

  • Direct Driven The effect of a controlled cooling system on the solar array of DC air conditioner [Volume 11, Issue 2, 2020, Page 113-120]

  • Directly and Indirectly Loaded Shear Strength of Directly and Indirectly Loaded Rectangular Self - Compacted Reinforced Concrete Deep Beams Containing Recycled Concrete as Coarse Aggregate [Volume 11, Issue 2, 2020, Page 121-129]

  • Discrete Fourier Transform(DFT) Direct Algorithm for Computation of Inverse Real Fast Fourier Transform (IRDFT) [Volume 14, Issue 2, 2023, Page 19-27]

  • Distracted driving Distracted Driving Using Mobile Phone [Volume 12, Issue 2, 2021, Page 211-221]

  • Double-acting hydraulic cylinders Manufacturing of Electro-hydraulic Elevator System Controlled by PLC [Volume 11, Issue 2, 2020, Page 162-169]

  • Double pipe heat exchanger Numerical Investigation of Hydraulic-Thermal Performance for a Double-Pipe Heat Exchanger Equipped with 45°-Helical Ribs [Volume 12, Issue 2, 2021, Page 193-202]

  • Double pipe heat exchanger Numerical Investigation on the Thermal Performance of Double Pipe Heat Exchanger Using Different Shapes of Fins [Volume 10, Issue 2, 2019, Page 326-348]

  • Drip irrigation Numerical Modelling and Experimental Investigation of Water Distribution in Stratified Soil Under Subsurface Trickle [Volume 11, Issue 2, 2020, Page 94-101]

  • Dropped mass Dynamical effects of the impact of falling mass on stiffened rectangular plate [Volume 5, Issue 1, 2012, Page 64-75]

  • Dwelling satisfaction The Evaluation of Living spaces and Service parts in The Dwell-ing Units in single-family Housing Projects in Erbil city [Volume 13, Issue 2, 2022, Page 1-13]

  • Dwelling units The Evaluation of Living spaces and Service parts in The Dwell-ing Units in single-family Housing Projects in Erbil city [Volume 13, Issue 2, 2022, Page 1-13]

  • Dynamic Load Dynamic Response of a Cracked Composite Beam subjected to moving Load [Volume 10, Issue 2, 2019, Page 393-398]

E

  • EEE Study of WMAN Physical Layer under Fading Channels [Volume 7, Issue 1, 2016, Page 21-31]

  • Efficiency Prediction of Thermal Characteristics For Solar Water Heater [Volume 4, Issue 2, 2011, Page 18-32]

  • Efficiency Experimental and Theoretical Study of a Parabolic Trough Solar Collector [Volume 5, Issue 1, 2012, Page 109-125]

  • EI Simulation of Storm Sewer Network Using a Storm Water Man-agement Model (SWMM), Ramadi City as a Case Study [Volume 12, Issue 1, 2021, Page 83-89]

  • Electrodynamic System Simulation Performance Study of Broadband and a Dual-Band Antenna- Array of Telecommunication Systems [Volume 13, Issue 2, 2022, Page 74-83]

  • Electro-hydraulic system Manufacturing of Electro-hydraulic Elevator System Controlled by PLC [Volume 11, Issue 2, 2020, Page 162-169]

  • Elevator Manufacturing of Electro-hydraulic Elevator System Controlled by PLC [Volume 11, Issue 2, 2020, Page 162-169]

  • Enclosure Effect of Inclination Angle of The Side Walls on The Natural Convection Heat Transfer Inside an Enclosure [Volume 8, Issue 1, 2017, Page 158-168]

  • Energy efficiency Methodologies Employed to Cool Photovoltaic Modules for Enhancing Efficiency: A Review [Volume 13, Issue 2, 2022, Page 49-62]

  • Energy Saving Experimental Investigation of Heat Reduction through Walls Using Phase Change Material [Volume 9, Issue 1, 2018, Page 245-251]

  • Energy Storage Use of Phase Change Material in Residential Walls to Reduce Cooling Load [Volume 4, Issue 1, 2011, Page 72-86]

  • Engineering Dimensions The Engineering dimensions and its impact on the sustainability on the roads network in Ramadi city [Volume 12, Issue 2, 2021, Page 157-167]

  • Enhancement Enhancement of Adiabatic Film Cooling Effectiveness by Using Conical Shape Hole [Volume 6, Issue 2, 2013, Page 465-478]

  • Enhancement of heat transfer Influence of Various Types of Twisted Tape inserts on Hydrody-namic, Pressure Drop and Thermal Heat Performance in Heat Ex-changers: A Review Study [Volume 12, Issue 1, 2021, Page 29-46]

  • Environment TAIL PLANE DESIGN FOR SATISFYING LONGITUDINAL HANDLING QUALITIES [Volume 1, Issue 2, 2008, Page 1-14]

  • Environment THE EFFECT OF NOISE STUDY AT CITY PLANNING FOR SPECIFYING THE USES OF LAND [Volume 1, Issue 2, 2008, Page 133-142]

  • EPANET Hydraulic Analysis study and redesign of the water distribution system simulation using GIS- EPANET, case study: Laylan sub-district, Kirkuk city, Iraq [Volume 15, Issue 1, 2024, Page 1-16]

  • Epoxy EXPERIMENTAL INVESTIGATION AND NONLINEAR ANALYSIS OF POLYMER MEMBERS SUBJECTED TO UNIAXIAL TENSION [Volume 1, Issue 2, 2008, Page 87-97]

  • Epoxy TAIL PLANE DESIGN FOR SATISFYING LONGITUDINAL HANDLING QUALITIES [Volume 1, Issue 2, 2008, Page 1-14]

  • Ethanol Thermal Performance of a Heat Pipe with Sintered Powder Metal Wick Using Ethanol and Water as Working Fluids [Volume 4, Issue 1, 2011, Page 62-71]

  • Euphrates Euphrates River Water Quality Studies in Iraq: Critical Review [Volume 10, Issue 1, 2019, Page 61-66]

  • Evaporation Experimental Investigation about the Parameters that Effect on Evap-oration from Sub-storage Reservoir [Volume 9, Issue 1, 2018, Page 260-266]

  • Evaporation Losses Wadi Houran Agriculture Surface Area Water Level Minimizing Evaporation Losses from Small Reservoirs (Wadi Houran-case study) [Volume 12, Issue 1, 2021, Page 76-82]

  • Evaporator REVIEW ON COOLING METHOD OF GAS TURBINE POWER PLANT [Volume 14, Issue 1, 2023, Page 40-49]

  • Experimental Study Experimental Investigation of Heat Reduction through Walls Using Phase Change Material [Volume 9, Issue 1, 2018, Page 245-251]

  • Experimental Test STRUCTURAL BEHAVIOR OF COMPOSITE SLABS SUBJECTED TO IMPACT LOADING [Volume 8, Issue 1, 2017, Page 176-184]

  • Explicit Technique Use of Phase Change Material in Residential Walls to Reduce Cooling Load [Volume 4, Issue 1, 2011, Page 72-86]

  • Extended surface Numerical Investigation on the Thermal Performance of Double Pipe Heat Exchanger Using Different Shapes of Fins [Volume 10, Issue 2, 2019, Page 326-348]

F

  • FA The use of multivariate statistical techniques in the assessment of river water quality [Volume 11, Issue 2, 2020, Page 102-112]

  • Fading Scintillation Effect on Satellite Communications within Standard Atmosphere [Volume 2, Issue 2, 2009, Page 17-27]

  • Fading Study of WMAN Physical Layer under Fading Channels [Volume 7, Issue 1, 2016, Page 21-31]

  • Fading channel Two Dimensional Wavelet Transform Model for OFDM System [Volume 2, Issue 2, 2009, Page 58-68]

  • Fallujah Irrigation Project Improving the Irrigation Systems for the Fallujah Irrigation Projects by Using Water Evaluation and Planning Model (WEAP) [Volume 14, Issue 2, 2023, Page 64-75]

  • Falluja Substation Practical Implementation of SCADA System for Falluja Substation [Volume 2, Issue 2, 2009, Page 28-46]

  • Feed Feed-Interval Scallop Height Estimation Using Multi-axis CNC Milling Machine [Volume 5, Issue 1, 2012, Page 51-63]

  • FEM Transient Interlaminar Thermal Stress Analysis of angle-ply Silicon/Lithium Aluminosilicate Composite plate [Volume 2, Issue 2, 2009, Page 47-57]

  • Fiber volume Transient Interlaminar Thermal Stress Analysis of angle-ply Silicon/Lithium Aluminosilicate Composite plate [Volume 2, Issue 2, 2009, Page 47-57]

  • Fill Material Use White Cement Kiln Dust As A Mineral Filler In Asphalt Mixture [Volume 7, Issue 1, 2016, Page 50-55]

  • Filter Analysis of seepage through Al-Wand Dam by using SEEP/W ModelAnalysis of seepage through Al-Wand Dam by using SEEP/W Model [Volume 11, Issue 1, 2020, Page 33-37]

  • Filtration Review on Technology-Based on Reverse Osmosis [Volume 14, Issue 1, 2023, Page 89-97]

  • Finite element analysis Torsional Behavior of Strengthened Reinforced Concrete Beams by CFRP Sheets: Parametric study [Volume 12, Issue 2, 2021, Page 229-244]

  • Finite element method Temperature Distribution Through Asphalt Pavement in Tropical Zone [Volume 5, Issue 2, 2012, Page 188-197]

  • Finite element method Static analysis of two-directional functionally graded cylindrical panels under the effect of symmetric loads using finite element method (FEM) [Volume 10, Issue 2, 2019, Page 408-424]

  • Finite elements Transient Analysis of Composite Plates with Different Types of Cutout [Volume 5, Issue 1, 2012, Page 1-21]

  • Finite recurrent backpropagation network Neuro Controller For Time Varying Dynamical System. [Volume 3, Issue 1, 2010, Page 34-48]

  • Finite volume method Numerical Study on Hydrothermal Performance Factor Using Jet impingement and Nanofluid [Volume 10, Issue 2, 2019, Page 308-315]

  • Fins angles Experimental study on thermal performance of counter flow wet cooling tower and effect of fins angle [Volume 10, Issue 1, 2019, Page 1-8]

  • Fire Clay Effect of Fire Clay Powder on The Properties of Ceramic Materials Produced by Using Kaolin [Volume 3, Issue 2, 2010, Page 72-77]

  • First-order shear deformation theory Static analysis of two-directional functionally graded cylindrical panels under the effect of symmetric loads using finite element method (FEM) [Volume 10, Issue 2, 2019, Page 408-424]

  • First Ply Failure Prediction of First Ply Failure of Composite Pressure Vessels Under Internal Pressure: A review [Volume 13, Issue 1, 2022, Page 76-84]

  • Flat Tube Natural Convection Heat Transfer in Horizontal Concentric Annulus between Outer Cylinder and Inner Flat Tube [Volume 3, Issue 2, 2010, Page 31-45]

  • Foamed Concrete Effect of Crumb Tyres Rubber on Some Properties of Foamed Concrete [Volume 4, Issue 2, 2011, Page 1-17]

  • Fogging methods REVIEW ON COOLING METHOD OF GAS TURBINE POWER PLANT [Volume 14, Issue 1, 2023, Page 40-49]

  • Force convection Study of the Performance Thermal Forced Unglazed Solar Air Collector [Volume 5, Issue 2, 2012, Page 311-332]

  • Forced Convection Numerical Study Of Turbulent Thermal-Hydraulic Performance Of Al2o3-Water Nanofluid In Channel With Triangular Baffles [Volume 7, Issue 1, 2016, Page 13-20]

  • Forward Theoretical and Experimental Study of a Forward Swept Wing [Volume 3, Issue 2, 2010, Page 15-30]

  • Fouling A Review on Recent Techniques for Boiler Tubes Corrosion Protection and Fouling Mitigation Using PLC [Volume 11, Issue 2, 2020, Page 184-191]

  • Fracture toughness Preparation a Composite Material (UP/Cann F) with Evaluation Its Toughness Under the Influence of Temperature and Humidity. [Volume 5, Issue 2, 2012, Page 198-208]

  • Frame size Performance Analysis of Serial Concatenation Convolutional Codes Based on Amplitude Matrix [Volume 2, Issue 2, 2009, Page 1-16]

  • Free vibration analysis Free Vibration Analysis of Clamped Laminated Composite Plates with Centeral Crack [Volume 12, Issue 1, 2021, Page 108-115]

  • Frequency Reduction Investigation of Frequency Reduction Behavior on Three Phase Synchronous Generator And Transformer [Volume 4, Issue 1, 2011, Page 17-33]

  • Fresh Properties Properties of Sustainable Self- compacting Concrete Containing Treated and Modified Waste Plastic Fibers [Volume 13, Issue 1, 2022, Page 23-34]

  • Friction factor TAIL PLANE DESIGN FOR SATISFYING LONGITUDINAL HANDLING QUALITIES [Volume 1, Issue 2, 2008, Page 1-14]

  • Friction factor EFFECT OF VORTEX GENERATORS ON A FRICTION FACTOR IN AN EQUILATERAL TRIANGULAR DUCT [Volume 1, Issue 2, 2008, Page 78-86]

  • FRP Strengthening Time-dependent Numerical Modeling of Plain Concrete Columns Wrapped by FRP Sheets [Volume 9, Issue 1, 2018, Page 267-280]

  • FRP Strengthening The Optimum Priorities In Improving The Infrastructure Of Al-Anbar Governorate Road Network Using R.S. Data, GIS And Graph Theory [Volume 9, Issue 1, 2018, Page 281-299]

  • FSO OPTIMUM DESIGN OF BUTTRESS DAM USING GENETIC ALGORITHM [Volume 14, Issue 2, 2023, Page 40-52]

  • FSS OPTIMUM DESIGN OF BUTTRESS DAM USING GENETIC ALGORITHM [Volume 14, Issue 2, 2023, Page 40-52]

  • Full filled Performance of a double-pipe heat exchanger with different met-al foam arrangements [Volume 12, Issue 2, 2021, Page 100-112]

  • Fully Developed Turbulent flow TAIL PLANE DESIGN FOR SATISFYING LONGITUDINAL HANDLING QUALITIES [Volume 1, Issue 2, 2008, Page 1-14]

  • Fully Developed Turbulent flow EFFECT OF VORTEX GENERATORS ON A FRICTION FACTOR IN AN EQUILATERAL TRIANGULAR DUCT [Volume 1, Issue 2, 2008, Page 78-86]

  • Functionally graded materials Experimental and simulation investigation of porous Functionally Graded beam under bending loading [Volume 14, Issue 1, 2023, Page 98-107]

  • Fuzzy inference systems Fuzzy Controller Parameters Optimization Based Particle Swarm Optimization Algorithm for Electro-Hydraulic System [Volume 8, Issue 1, 2017, Page 120-133]

  • Fuzzy Logic Developing of a Fuzzy Logic Controller for Air Conditioning System [Volume 5, Issue 2, 2012, Page 180-187]

  • Fuzzy Logic Fuzzy Model Reference Adaptive Controller for DC Motor [Volume 8, Issue 1, 2017, Page 107-112]

  • Fuzzy reliability Fuzzy Reliability-Vulnerability for Evaluation of Water Supply System Performance [Volume 10, Issue 1, 2019, Page 72-82]

G

  • Genetic Algorithem Image Compression Using Vector Quantization and Genetic Algorithms [Volume 1, Issue 1, 2008, Page 45-58]

  • Geo Data Base Building of a Spatial Database to Identify Areas of Contamination by Mines and Hazardous Remnants of War by Using GIS (Analytical Study / Basra Governorate) [Volume 9, Issue 1, 2018, Page 252-259]

  • GIS Study of Soil Chemical Characteristic by Remote Sensing and GIS Techniques [Volume 4, Issue 1, 2011, Page 87-106]

  • GIS Delineation of Prospecting Zones of Groundwater Using Remote Sensing and Geographic Information System (GIS): A case Study of Solani River Basin [Volume 7, Issue 1, 2016, Page 7-13]

  • GIS Building of a Spatial Database to Identify Areas of Contamination by Mines and Hazardous Remnants of War by Using GIS (Analytical Study / Basra Governorate) [Volume 9, Issue 1, 2018, Page 252-259]

  • Glass Fibers Effect of water on impact strength for unsaturated polyester composites reinforced with E-glass fibers [Volume 5, Issue 2, 2012, Page 279-294]

  • Glass Fibers Characterizations of Hybrid Composites of Linen /Glass Fibers for Automotive and Transportation Applications [Volume 13, Issue 2, 2022, Page 114-121]

  • GQFD Integration Environmental Aspects onto Customer Requirement to Develop Green Quality Function Deployment [Volume 11, Issue 1, 2020, Page 66-78]

  • Granite waste Evaluate the granite waste efficiency in the construction using statistical indicators [Volume 14, Issue 1, 2023, Page 66-72]

  • Gray Wolf Optimizer IHS Image Fusion Based on Gray Wolf Optimizer (GWO) [Volume 13, Issue 1, 2022, Page 65-75]

  • Grey Wolf Optimization Dam and Reservoir System Management based on Genetic Algorithms [Volume 13, Issue 1, 2022, Page 46-52]

  • Ground water Effect of Polymer SBR on Strength Reduction in Concrete Immersed in Drainage and Ground Water [Volume 12, Issue 2, 2021, Page 168-176]

H

  • Hardened Properties Properties of Sustainable Self- compacting Concrete Containing Treated and Modified Waste Plastic Fibers [Volume 13, Issue 1, 2022, Page 23-34]

  • Hardness Mechanical Properties of Welded Martensitic Stainless Steel (AISI420) Subject to Different Heat Treatment [Volume 11, Issue 1, 2020, Page 12-18]

  • Hardness Effect of Adding Degassing (Ar-N2) on Hardness and Microstructure of Recycling Aluminum Cans [Volume 11, Issue 1, 2020, Page 38-42]

  • Hazardous Building of a Spatial Database to Identify Areas of Contamination by Mines and Hazardous Remnants of War by Using GIS (Analytical Study / Basra Governorate) [Volume 9, Issue 1, 2018, Page 252-259]

  • Head pressure Hydraulic Analysis of Fallujah Water Network By Using a Program EPANET [Volume 3, Issue 2, 2010, Page 112-124]

  • Heated from below Effect of Inclination Angle of The Side Walls on The Natural Convection Heat Transfer Inside an Enclosure [Volume 8, Issue 1, 2017, Page 158-168]

  • Heating Developing of a Fuzzy Logic Controller for Air Conditioning System [Volume 5, Issue 2, 2012, Page 180-187]

  • Heat insulators Improvement of General Properties of Thermal Insulators Prepared from Syrian Locally Raw Kaolin [Volume 3, Issue 2, 2010, Page 91-111]

  • Heat pipe Thermal Performance of a Heat Pipe with Sintered Powder Metal Wick Using Ethanol and Water as Working Fluids [Volume 4, Issue 1, 2011, Page 62-71]

  • Heat transfer coefficient Experimental Study of Parabolic Trough Receiver with Perforated Twisted Tape Insert Using Fuzzy Model Analysis [Volume 12, Issue 2, 2021, Page 130-138]

  • Heat transfer enhancement Effect of Delta–Winglet Vortex Generators on a Forced Convection Heat Transfer in an Asymmetrically Heated Triangular Duct [Volume 1, Issue 1, 2008, Page 31-44]

  • Heat transfer enhancement Numerical Study of Fluid Flow and Heat Transfer over a Bank of Oval-Tubes Heat Exchanger with Vortex Generators [Volume 5, Issue 1, 2012, Page 88-108]

  • Heat transfer enhancement Performance of a double-pipe heat exchanger with different met-al foam arrangements [Volume 12, Issue 2, 2021, Page 100-112]

  • Heat transfer enhancement Numerical Investigation of Hydraulic-Thermal Performance for a Double-Pipe Heat Exchanger Equipped with 45°-Helical Ribs [Volume 12, Issue 2, 2021, Page 193-202]

  • Heritage Documentation 3D Reconstruction by Structure from Motion Approach for Heritage Documentation [Volume 14, Issue 1, 2023, Page 31-39]

  • High performance Performance Study of Broadband and a Dual-Band Antenna- Array of Telecommunication Systems [Volume 13, Issue 2, 2022, Page 74-83]

  • High Strength Concrete Numerical Investigations of Bond-Slip Performance in Pull-Out High Strength Concrete Specimens Subjected to Elevated [Volume 12, Issue 1, 2021, Page 20-28]

  • High Strength Concrete Effect of Anchorage Length on the Shear Capacity of High Strength Concrete Deep Beams [Volume 12, Issue 1, 2021, Page 47-56]

  • Hof's theory Hoff's Investigation of The Sandwich Panel with Honeycomb Core [Volume 13, Issue 2, 2022, Page 63-68]

  • Hollow core slab Assessment the Shear Behavior of Sustainable Thick Hollow Core Slab Using Experimental and Nonlinear Finite Element Modelling [Volume 10, Issue 1, 2019, Page 35-43]

  • HOQ Develop QFD and AHP Models for Liquid Gas Valve for Product Developmen [Volume 11, Issue 1, 2020, Page 25-32]

  • HOQ Integration Environmental Aspects onto Customer Requirement to Develop Green Quality Function Deployment [Volume 11, Issue 1, 2020, Page 66-78]

  • Horizontal Annulus Natural Convection Heat Transfer in Horizontal Concentric Annulus between Outer Cylinder and Inner Flat Tube [Volume 3, Issue 2, 2010, Page 31-45]

  • Hot mix asphalt Influence of Using White Cement Kiln Dust as Mineral Filler on Hot Asphalt Concrete Mixture Properties [Volume 8, Issue 1, 2017, Page 148-157]

  • Hot press Characterizations of Hybrid Composites of Linen /Glass Fibers for Automotive and Transportation Applications [Volume 13, Issue 2, 2022, Page 114-121]

  • Housing Planning Evaluation of Housing of Low-in come Projectsin Ramadi City [Volume 4, Issue 2, 2011, Page 125-140]

  • Hydraulic analysis Hydraulic Analysis of Fallujah Water Network By Using a Program EPANET [Volume 3, Issue 2, 2010, Page 112-124]

  • Hydraulic analysis Hydraulic Analysis study and redesign of the water distribution system simulation using GIS- EPANET, case study: Laylan sub-district, Kirkuk city, Iraq [Volume 15, Issue 1, 2024, Page 1-16]

  • Hydraulic Structures Emperical and Numerical Solution Of Seepage Problems Underneath Hydraulic Structures [Volume 12, Issue 1, 2021, Page 1-9]

  • Hydraulic thermal design Effect of Grooves Geometric Parameters on Hydraulic Thermal Performance of Circular Pipe Partially Filled with Metallic Foam [Volume 10, Issue 2, 2019, Page 316-325]

I

  • IBC PEM Fuel Cell Powered Multilevel Converter [Volume 9, Issue 1, 2018, Page 300-307]

  • IHS IHS Image Fusion Based on Gray Wolf Optimizer (GWO) [Volume 13, Issue 1, 2022, Page 65-75]

  • Image Compression Image Compression Using Vector Quantization and Genetic Algorithms [Volume 1, Issue 1, 2008, Page 45-58]

  • Image Compression New Quality Metric for Compressed Images [Volume 11, Issue 2, 2020, Page 154-161]

  • Image Fusion IHS Image Fusion Based on Gray Wolf Optimizer (GWO) [Volume 13, Issue 1, 2022, Page 65-75]

  • Image Processing 3D Reconstruction by Structure from Motion Approach for Heritage Documentation [Volume 14, Issue 1, 2023, Page 31-39]

  • Image Quality Assessment New Quality Metric for Compressed Images [Volume 11, Issue 2, 2020, Page 154-161]

  • Impact loading STRUCTURAL BEHAVIOR OF COMPOSITE SLABS SUBJECTED TO IMPACT LOADING [Volume 8, Issue 1, 2017, Page 176-184]

  • Impact resistance Experimental Investigation on the Efficacy of Polyethylene Aggregate on Impact Resistance of Concrete Slab [Volume 10, Issue 1, 2019, Page 9-15]

  • Impact strength Polymer Modified Polystyrene Concrete [Volume 4, Issue 2, 2011, Page 80-93]

  • Impact strength Effect of water on impact strength for unsaturated polyester composites reinforced with E-glass fibers [Volume 5, Issue 2, 2012, Page 279-294]

  • Impact strength Characterization of Rotary Friction Welded AISI 304 Steel Joints [Volume 11, Issue 2, 2020, Page 202-210]

  • Improve Irrigation Systems Improving the Irrigation Systems for the Fallujah Irrigation Projects by Using Water Evaluation and Planning Model (WEAP) [Volume 14, Issue 2, 2023, Page 64-75]

  • IMPROVING A New Separation, Fractionation and Improving of Abu- Aljeer Asphalt [Volume 7, Issue 1, 2016, Page 31-41]

  • Improving shear strength and Crushed clay bric Assessment the Shear Behavior of Sustainable Thick Hollow Core Slab Using Experimental and Nonlinear Finite Element Modelling [Volume 10, Issue 1, 2019, Page 35-43]

  • Inclination of vertical walls Effect of Inclination Angle of The Side Walls on The Natural Convection Heat Transfer Inside an Enclosure [Volume 8, Issue 1, 2017, Page 158-168]

  • Include at least 3 and at most 5 keywords or phrases Preparation and Application of Natural and Low Cost Palm Fibers as an Effective Drag Reducing Agent for Flow Improvement in Iraqi Crude Oil Pipelines [Volume 11, Issue 1, 2020, Page 6-11]

  • India Delineation of Prospecting Zones of Groundwater Using Remote Sensing and Geographic Information System (GIS): A case Study of Solani River Basin [Volume 7, Issue 1, 2016, Page 7-13]

  • Integration The Integration Between the Structural System and the Envelope System in Earthquake Resistance Design [Volume 11, Issue 1, 2020, Page 79-93]

  • Interaction TAIL PLANE DESIGN FOR SATISFYING LONGITUDINAL HANDLING QUALITIES [Volume 1, Issue 2, 2008, Page 1-14]

  • Interaction BEHAVIOR OF MULTI-LAYER COMPOSITE CONTINUOUS BEAMS WITH PARTIAL INTERACTION [Volume 1, Issue 2, 2008, Page 51-68]

  • Interior spaces Analyzing kindergarten's Interior Spaces for Enhancing Children's Creativity Erbil City as a Case Study [Volume 13, Issue 1, 2022, Page 85-97]

  • Iraq Implications Of Cash Flow Forecasting On Highway Projects In Iraq [Volume 7, Issue 1, 2016, Page 56-62]

  • Iraq Euphrates River Water Quality Studies in Iraq: Critical Review [Volume 10, Issue 1, 2019, Page 61-66]

  • Iraq Investigation of human thermal comfort and improvement in public places adapted to a hot climate in Iraq [Volume 10, Issue 2, 2019, Page 349-361]

  • Iraqi housing standards The Evaluation of Living spaces and Service parts in The Dwell-ing Units in single-family Housing Projects in Erbil city [Volume 13, Issue 2, 2022, Page 1-13]

  • Iron oxide The Removal of Iron Oxide From Kaolin Clay by Hydrometallurgy Method [Volume 4, Issue 2, 2011, Page 112-124]

J

  • Jet Impingement Numerical Study on Hydrothermal Performance Factor Using Jet impingement and Nanofluid [Volume 10, Issue 2, 2019, Page 308-315]

  • JPEG New Quality Metric for Compressed Images [Volume 11, Issue 2, 2020, Page 154-161]

  • JPEG2000 New Quality Metric for Compressed Images [Volume 11, Issue 2, 2020, Page 154-161]

K

  • Kaplan Investigating the Service life of asphalt pavement in a sample of Ramadi district roads [Volume 8, Issue 1, 2017, Page 169-175]

  • Key distribution Unconditionally Secure Authentication in Quantum Key Distribution [Volume 1, Issue 1, 2008, Page 59-76]

  • Key Exchange Key Exchange Protocol Supporting Mobility and Multihoming [Volume 1, Issue 1, 2008, Page 11-30]

  • Key Generation Modified Key Model of Data Encryption Standard [Volume 3, Issue 1, 2010, Page 20-33]

  • Key Words Use White Cement Kiln Dust As A Mineral Filler In Asphalt Mixture [Volume 7, Issue 1, 2016, Page 50-55]

  • Keywords: Milling Process Study the effects of milling parameters on surface roughness for Low Carbon Steel AISI 1015 [Volume 14, Issue 1, 2023, Page 1-6]

  • Khosla’s theory Emperical and Numerical Solution Of Seepage Problems Underneath Hydraulic Structures [Volume 12, Issue 1, 2021, Page 1-9]

  • Kim’s test Rutting Performance of Asphalt Layers Mixtures with Inclusion RAP Materials [Volume 12, Issue 2, 2021, Page 203-210]

  • Kindergarten Analyzing kindergarten's Interior Spaces for Enhancing Children's Creativity Erbil City as a Case Study [Volume 13, Issue 1, 2022, Page 85-97]

  • Kurdistan Investment Board The Evaluation of Living spaces and Service parts in The Dwell-ing Units in single-family Housing Projects in Erbil city [Volume 13, Issue 2, 2022, Page 1-13]

L

  • Ladder Diagram Preparing a PLC Program for the Kiln Entrance of Ceramic [Volume 2, Issue 2, 2009, Page 82-94]

  • Ladder Logic Preparing a PLC Program for the Kiln Entrance of Ceramic [Volume 2, Issue 2, 2009, Page 82-94]

  • Laminar Flow TAIL PLANE DESIGN FOR SATISFYING LONGITUDINAL HANDLING QUALITIES [Volume 1, Issue 2, 2008, Page 1-14]

  • Laminar Flow AIDING AND OPPOSING MIXED CONVECTION FROM AN ARRAY OF CIRCULAR CYLINDERS IN A SATURATED POROUS MEDIUM [Volume 1, Issue 2, 2008, Page 15-26]

  • Laminar Flow Numerical Study on Hydrothermal Performance Factor Using Jet impingement and Nanofluid [Volume 10, Issue 2, 2019, Page 308-315]

  • Latent Heat Storage Use of Phase Change Material in Residential Walls to Reduce Cooling Load [Volume 4, Issue 1, 2011, Page 72-86]

  • Layers Increasing ultimate strength of reinforced concrete slab by using Reactive Powder Concrete and study the effect of high temperature on them [Volume 10, Issue 1, 2019, Page 16-26]

  • Laylan Hydraulic Analysis study and redesign of the water distribution system simulation using GIS- EPANET, case study: Laylan sub-district, Kirkuk city, Iraq [Volume 15, Issue 1, 2024, Page 1-16]

  • Lean The Impact of Inventories on the Leanness of Job Shop Production System [Volume 10, Issue 2, 2019, Page 425-435]

  • Legislation Distracted Driving Using Mobile Phone [Volume 12, Issue 2, 2021, Page 211-221]

  • Level of Service Evaluation and Improvement of Traffic Operation for Al-Zeoat Intersection in Al-Ramadi City [Volume 3, Issue 2, 2010, Page 46-57]

  • Level of service Sustainability Evaluation of transportation network in AL- Fallujah city [Volume 12, Issue 2, 2021, Page 146-156]

  • Lifetime Investigating the Service life of asphalt pavement in a sample of Ramadi district roads [Volume 8, Issue 1, 2017, Page 169-175]

  • LiFi Review of modern applications of solar cells in communication systems [Volume 13, Issue 2, 2022, Page 133-146]

  • Light laser Transmitting and Receiving Ultrasound Wave Based on Laser Light [Volume 11, Issue 1, 2020, Page 1-5]

  • Light weight concrete Some Mechanical Properties of Reactive PowderLight Weight Concrete [Volume 4, Issue 1, 2011, Page 47-61]

  • Lightweight concrete Polymer Modified Polystyrene Concrete [Volume 4, Issue 2, 2011, Page 80-93]

  • Lightweight concrete Study Some Mechanical Properties of Mortar with Sawdust as a Partially Replacement of Sand [Volume 5, Issue 1, 2012, Page 22-30]

  • Lightweight concrete Assessment the Shear Behavior of Sustainable Thick Hollow Core Slab Using Experimental and Nonlinear Finite Element Modelling [Volume 10, Issue 1, 2019, Page 35-43]

  • Lime Evaluation and treatment of waste water effect on groundwater quality (the University of Anbar area as a case study) [Volume 12, Issue 2, 2021, Page 139-145]

  • Linear analysis Static analysis of two-directional functionally graded cylindrical panels under the effect of symmetric loads using finite element method (FEM) [Volume 10, Issue 2, 2019, Page 408-424]

  • Linear Shrinkage Effect of Fire Clay Powder on The Properties of Ceramic Materials Produced by Using Kaolin [Volume 3, Issue 2, 2010, Page 72-77]

  • Linen fibre Characterizations of Hybrid Composites of Linen /Glass Fibers for Automotive and Transportation Applications [Volume 13, Issue 2, 2022, Page 114-121]

  • Liquid Limit Nature of Soil-Water Characteristics Curves (SWCC)for Soils from Anbar Governorate [Volume 3, Issue 1, 2010, Page 61-80]

  • Longitudinal Effect Orientation on Performance of Longitudinal (Trapezoidal) Fins Heat Sink Subjected to Natural Convection [Volume 2, Issue 2, 2009, Page 69-81]

  • Longitudinal Handling TAIL PLANE DESIGN FOR SATISFYING LONGITUDINAL HANDLING QUALITIES [Volume 1, Issue 2, 2008, Page 1-14]

  • Low- velocity impact Experimental Investigation on the Efficacy of Polyethylene Aggregate on Impact Resistance of Concrete Slab [Volume 10, Issue 1, 2019, Page 9-15]

  • LPTN Thermal Analysis of Switched Reluctance Motor Based on RMXprt/Motor-CAD [Volume 14, Issue 1, 2023, Page 7-14]

M

  • Machine learning Detection of Obesity Stages Using Machine Learning Algorithms [Volume 14, Issue 1, 2023, Page 80-88]

  • Maintenance Estimating Optimum Period of Time Between Maintenances by Using Monte Carlo Simulation Method [Volume 5, Issue 2, 2012, Page 226-240]

  • MANET Performance Evaluation of AODV Routing Protocol in MANET using OPNET Simulator [Volume 5, Issue 2, 2012, Page 241-257]

  • Manipulator kinematics Kinematic Workspace Modelling of Two Links Robotic Manipulator [Volume 11, Issue 1, 2020, Page 19-24]

  • Marshall Test Influence of Using White Cement Kiln Dust as Mineral Filler on Hot Asphalt Concrete Mixture Properties [Volume 8, Issue 1, 2017, Page 148-157]

  • Marshal Test Use White Cement Kiln Dust As A Mineral Filler In Asphalt Mixture [Volume 7, Issue 1, 2016, Page 50-55]

  • Martensitic Stainless Steel Mechanical Properties of Welded Martensitic Stainless Steel (AISI420) Subject to Different Heat Treatment [Volume 11, Issue 1, 2020, Page 12-18]

  • Mass flow ratio Experimental study on thermal performance of counter flow wet cooling tower and effect of fins angle [Volume 10, Issue 1, 2019, Page 1-8]

  • MATHLAB Modeling and Performance of a Wind Turbine [Volume 1, Issue 1, 2008, Page 116-130]

  • Matlab Kinematic Workspace Modelling of Two Links Robotic Manipulator [Volume 11, Issue 1, 2020, Page 19-24]

  • Matlab Design and Implementing of a Buck Dc-To-Dc Converter into the DC Motor's Speed Controller in Matlab/Simulink [Volume 13, Issue 2, 2022, Page 36-41]

  • Mechanical properties Some Mechanical Properties of Reactive PowderLight Weight Concrete [Volume 4, Issue 1, 2011, Page 47-61]

  • Mechanical properties Effect of Crumb Tyres Rubber on Some Properties of Foamed Concrete [Volume 4, Issue 2, 2011, Page 1-17]

  • Meier method Investigating the Service life of asphalt pavement in a sample of Ramadi district roads [Volume 8, Issue 1, 2017, Page 169-175]

  • Metal foam arrangement Performance of a double-pipe heat exchanger with different met-al foam arrangements [Volume 12, Issue 2, 2021, Page 100-112]

  • Metal Matrix Composite Effect of SiC Addition the on Adhesive Wear Resistance of 6061 T6 Aluminum Alloy [Volume 5, Issue 2, 2012, Page 271-278]

  • MiCOM Practical Implementation of SCADA System for Falluja Substation [Volume 2, Issue 2, 2009, Page 28-46]

  • Micro Hardness Study Some Mechanical Properties of Mortar with Sawdust as a Partially Replacement of Sand [Volume 5, Issue 1, 2012, Page 22-30]

  • Micro Hardness Effect of Pulse Repetition Rate on Micro Hardness on the Surface and Cross Section of Gray Cast Iron by using ND-YAG Laser [Volume 10, Issue 1, 2019, Page 67-71]

  • Microstructure Characterization of Rotary Friction Welded AISI 304 Steel Joints [Volume 11, Issue 2, 2020, Page 202-210]

  • Micrstructure Effect of Adding Degassing (Ar-N2) on Hardness and Microstructure of Recycling Aluminum Cans [Volume 11, Issue 1, 2020, Page 38-42]

  • Mineral oil Modify the Performance of Electrical Transformer by Analysis Oil Aged and Paper Insulation with Nanoparticales [Volume 10, Issue 2, 2019, Page 372-381]

  • Mines Building of a Spatial Database to Identify Areas of Contamination by Mines and Hazardous Remnants of War by Using GIS (Analytical Study / Basra Governorate) [Volume 9, Issue 1, 2018, Page 252-259]

  • MLC PEM Fuel Cell Powered Multilevel Converter [Volume 9, Issue 1, 2018, Page 300-307]

  • Modal split models Modal Split Model Using Multiple Linear Regression Analysis [Volume 12, Issue 2, 2021, Page 222-228]

  • Modeling Modeling and Performance of a Wind Turbine [Volume 1, Issue 1, 2008, Page 116-130]

  • Modification Asphalt Modification of (Hiet-Abojeer) Asphalt Properties Using Wastes of Cement and Fertilizer Plant to Increase Area of Its Application [Volume 4, Issue 1, 2011, Page 153-174]

  • Modified Broadband Butterfly Antenna Performance Study of Broadband and a Dual-Band Antenna- Array of Telecommunication Systems [Volume 13, Issue 2, 2022, Page 74-83]

  • Modulation Transmitting and Receiving Ultrasound Wave Based on Laser Light [Volume 11, Issue 1, 2020, Page 1-5]

  • Modulus of elasticity Effect of Admixture Type on Compressive Strength and Modulus of Elasticity of Rubber- Tire - Waste Concrete [Volume 1, Issue 1, 2008, Page 88-103]

  • Monte Carlo Method Estimating Optimum Period of Time Between Maintenances by Using Monte Carlo Simulation Method [Volume 5, Issue 2, 2012, Page 226-240]

  • Moving Load Study of Multi-Cracked Cantilever Composite Beams Subjected to External Moving Load [Volume 10, Issue 1, 2019, Page 27-34]

  • Moving Load Dynamic Response of a Cracked Composite Beam subjected to moving Load [Volume 10, Issue 2, 2019, Page 393-398]

  • MRR Investigation of Milling Parameters Effect on Material Removal Rate Using Taguchi and Artificial Neural Network Techniques [Volume 10, Issue 1, 2019, Page 83-88]

  • MRR Study the Effect of Cutting Parameters of Abrasive Water Jet Process on Aluminum Alloy 5083 [Volume 13, Issue 2, 2022, Page 99-105]

  • MSE New Quality Metric for Compressed Images [Volume 11, Issue 2, 2020, Page 154-161]

  • MSS Mechanical Properties of Welded Martensitic Stainless Steel (AISI420) Subject to Different Heat Treatment [Volume 11, Issue 1, 2020, Page 12-18]

  • Multicriteria Decision Making in Materials Selection: an Integrated Approach with AHP [Volume 10, Issue 2, 2019, Page 399-407]

  • Multiple Cracked Beams Study of Multi-Cracked Cantilever Composite Beams Subjected to External Moving Load [Volume 10, Issue 1, 2019, Page 27-34]

  • Multivariate statistics The use of multivariate statistical techniques in the assessment of river water quality [Volume 11, Issue 2, 2020, Page 102-112]

N

  • Nakagami Study of WMAN Physical Layer under Fading Channels [Volume 7, Issue 1, 2016, Page 21-31]

  • Nanocomposites Unmodified and Organo-Modified clay content effect on Mechanical and Thermal Properties of the Waste Low Density Polyethylene [Volume 8, Issue 1, 2017, Page 140-147]

  • Nanofluid and Radiator Enhancing the effectiveness of the cooling system for automotive engine by employing different nanofluids: literature review [Volume 13, Issue 1, 2022, Page 53-58]

  • Nanoflu-ids Numerical Study on Hydrothermal Performance Factor Using Jet impingement and Nanofluid [Volume 10, Issue 2, 2019, Page 308-315]

  • Nanofluids Numerical Study Of Turbulent Thermal-Hydraulic Performance Of Al2o3-Water Nanofluid In Channel With Triangular Baffles [Volume 7, Issue 1, 2016, Page 13-20]

  • Natural Asphalt A New Separation, Fractionation and Improving of Abu- Aljeer Asphalt [Volume 7, Issue 1, 2016, Page 31-41]

  • Natural Convection TAIL PLANE DESIGN FOR SATISFYING LONGITUDINAL HANDLING QUALITIES [Volume 1, Issue 2, 2008, Page 1-14]

  • Natural Convection NUMERICAL STUDY OF NATURAL CONVECTION IN HORIZONTAL ECCENTRIC ANNULUS [Volume 1, Issue 2, 2008, Page 27-38]

  • Natural Convection Natural Convection Heat Transfer in Horizontal Concentric Annulus between Outer Cylinder and Inner Flat Tube [Volume 3, Issue 2, 2010, Page 31-45]

  • Natural Convection Effect Orientation on Performance of Longitudinal (Trapezoidal) Fins Heat Sink Subjected to Natural Convection [Volume 2, Issue 2, 2009, Page 69-81]

  • Natural Convection Effect of Inclination Angle of The Side Walls on The Natural Convection Heat Transfer Inside an Enclosure [Volume 8, Issue 1, 2017, Page 158-168]

  • ND-YAG Laser Effect of Pulse Repetition Rate on Micro Hardness on the Surface and Cross Section of Gray Cast Iron by using ND-YAG Laser [Volume 10, Issue 1, 2019, Page 67-71]

  • Networks Key Exchange Protocol Supporting Mobility and Multihoming [Volume 1, Issue 1, 2008, Page 11-30]

  • Noncircular ducts Effect of Delta–Winglet Vortex Generators on a Forced Convection Heat Transfer in an Asymmetrically Heated Triangular Duct [Volume 1, Issue 1, 2008, Page 31-44]

  • Non linear dynamic analysis Progressive Collapse Analyses of Buildings Subjected to Earthquake Loads [Volume 12, Issue 1, 2021, Page 10-19]

  • Nonlinear Finite element Assessment the Shear Behavior of Sustainable Thick Hollow Core Slab Using Experimental and Nonlinear Finite Element Modelling [Volume 10, Issue 1, 2019, Page 35-43]

  • Nonlinear Finite Elements Cyclic Torsion Behavior of Prestressed Concrete Beams [Volume 9, Issue 1, 2018, Page 233-244]

  • Nonlinear Material EXPERIMENTAL INVESTIGATION AND NONLINEAR ANALYSIS OF POLYMER MEMBERS SUBJECTED TO UNIAXIAL TENSION [Volume 1, Issue 2, 2008, Page 87-97]

  • Nonlinear Material TAIL PLANE DESIGN FOR SATISFYING LONGITUDINAL HANDLING QUALITIES [Volume 1, Issue 2, 2008, Page 1-14]

  • Non -Value Added Time The Impact of Inventories on the Leanness of Job Shop Production System [Volume 10, Issue 2, 2019, Page 425-435]

  • Normal Strain TAIL PLANE DESIGN FOR SATISFYING LONGITUDINAL HANDLING QUALITIES [Volume 1, Issue 2, 2008, Page 1-14]

  • Normal Strain STUDYING THE EFFECT OF CUTOUTS ON THE COMPOSITE LAMINATE PLATES [Volume 1, Issue 2, 2008, Page 69-77]

  • Numerical simulation Hydrothermal performance Plate Numerical Investigation of Hydrothermal Performance of Pinned Plate-Fin Microchannel Heat Sink [Volume 9, Issue 1, 2018, Page 210-232]

  • Numerical Simulations Experimental and simulation investigation of porous Functionally Graded beam under bending loading [Volume 14, Issue 1, 2023, Page 98-107]

  • NVAT The Impact of Inventories on the Leanness of Job Shop Production System [Volume 10, Issue 2, 2019, Page 425-435]

O

  • Obesity Detection of Obesity Stages Using Machine Learning Algorithms [Volume 14, Issue 1, 2023, Page 80-88]

  • Obesity Stages Detection of Obesity Stages Using Machine Learning Algorithms [Volume 14, Issue 1, 2023, Page 80-88]

  • OFDM Two Dimensional Wavelet Transform Model for OFDM System [Volume 2, Issue 2, 2009, Page 58-68]

  • OFDM Study of WMAN Physical Layer under Fading Channels [Volume 7, Issue 1, 2016, Page 21-31]

  • O-OFDM Direct Algorithm for Computation of Inverse Real Fast Fourier Transform (IRDFT) [Volume 14, Issue 2, 2023, Page 19-27]

  • Operation Policies Dam and Reservoir System Management based on Genetic Algorithms [Volume 13, Issue 1, 2022, Page 46-52]

  • Optimization Multi-Objective GA-Based Optimization to Maximize Sustainability for Product Design and Manufacturing [Volume 9, Issue 1, 2018, Page 195-201]

  • Optimization Optimization of Casting Conditions for Semi-Solid A356 Aluminum Alloy [Volume 10, Issue 1, 2019, Page 44-53]

  • Optimization Properties of Sustainable Self- compacting Concrete Containing Treated and Modified Waste Plastic Fibers [Volume 13, Issue 1, 2022, Page 23-34]

  • Optimization OPTIMUM DESIGN OF BUTTRESS DAM USING GENETIC ALGORITHM [Volume 14, Issue 2, 2023, Page 40-52]

  • Optimum period Estimating Optimum Period of Time Between Maintenances by Using Monte Carlo Simulation Method [Volume 5, Issue 2, 2012, Page 226-240]

  • ORE. Performance Evaluation of Overall Resource Effectiveness for Job Shop Production System [Volume 10, Issue 2, 2019, Page 362-371]

  • Orientation Angle Natural Convection Heat Transfer in Horizontal Concentric Annulus between Outer Cylinder and Inner Flat Tube [Volume 3, Issue 2, 2010, Page 31-45]

  • Orientation effect Effect Orientation on Performance of Longitudinal (Trapezoidal) Fins Heat Sink Subjected to Natural Convection [Volume 2, Issue 2, 2009, Page 69-81]

  • Overall Resource Efficiency Evaluation of Overall Resource Effectiveness for Job Shop Production System [Volume 10, Issue 2, 2019, Page 362-371]

  • Overall Work Efficiency The Impact of Inventories on the Leanness of Job Shop Production System [Volume 10, Issue 2, 2019, Page 425-435]

  • OWE The Impact of Inventories on the Leanness of Job Shop Production System [Volume 10, Issue 2, 2019, Page 425-435]

P

  • Pack Cementation High Temperature Cyclic Oxidation of Yttrium Modified Aluminide Diffusion Coatings of Stainless Steel [Volume 2, Issue 1, 2009, Page 61-70]

  • Pack Cementation High Temperature Behavior of Yttrium – Doped Siliconized 316L Stainless Steel at CO2 Environment [Volume 2, Issue 1, 2009, Page 49-60]

  • Panchromatic IHS Image Fusion Based on Gray Wolf Optimizer (GWO) [Volume 13, Issue 1, 2022, Page 65-75]

  • PAPER INFO Effect of Using Palm Wastes as Additive to Unsaturated Polyester on the Thermal and Acoustic Isolation Properties of a Composite Materials [Volume 9, Issue 1, 2018, Page 202-209]

  • PAPR Direct Algorithm for Computation of Inverse Real Fast Fourier Transform (IRDFT) [Volume 14, Issue 2, 2023, Page 19-27]

  • Parabolic trough solar collector Artificial Neural Networks Modeling of Heat Transfer Characteris-tics in a Parabolic Trough Solar Collector using Nano-Fluids [Volume 12, Issue 2, 2021, Page 245-255]

  • Parabolic trough solar collector system Experimental Study of Parabolic Trough Receiver with Perforated Twisted Tape Insert Using Fuzzy Model Analysis [Volume 12, Issue 2, 2021, Page 130-138]

  • Pareto chart Integration Environmental Aspects onto Customer Requirement to Develop Green Quality Function Deployment [Volume 11, Issue 1, 2020, Page 66-78]

  • Parking Areas Evaluation of Parking Areas in Ramadi CBD [Volume 4, Issue 1, 2011, Page 131-152]

  • Partial TAIL PLANE DESIGN FOR SATISFYING LONGITUDINAL HANDLING QUALITIES [Volume 1, Issue 2, 2008, Page 1-14]

  • Partial BEHAVIOR OF MULTI-LAYER COMPOSITE CONTINUOUS BEAMS WITH PARTIAL INTERACTION [Volume 1, Issue 2, 2008, Page 51-68]

  • Partially Filled Effect of Grooves Geometric Parameters on Hydraulic Thermal Performance of Circular Pipe Partially Filled with Metallic Foam [Volume 10, Issue 2, 2019, Page 316-325]

  • Partially/periodically filled Performance of a double-pipe heat exchanger with different met-al foam arrangements [Volume 12, Issue 2, 2021, Page 100-112]

  • Partial shear connector Torsional Capacity of Composite Reinforced Concrete Beams with Stirrup Connectors [Volume 12, Issue 2, 2021, Page 177-192]

  • Particle swarm optimization Fuzzy Controller Parameters Optimization Based Particle Swarm Optimization Algorithm for Electro-Hydraulic System [Volume 8, Issue 1, 2017, Page 120-133]

  • PCA The use of multivariate statistical techniques in the assessment of river water quality [Volume 11, Issue 2, 2020, Page 102-112]

  • PCM Experimental Investigation of Heat Reduction through Walls Using Phase Change Material [Volume 9, Issue 1, 2018, Page 245-251]

  • Penetration TAIL PLANE DESIGN FOR SATISFYING LONGITUDINAL HANDLING QUALITIES [Volume 1, Issue 2, 2008, Page 1-14]

  • Penetration A new technique for producing high-velocity liquid-like jet [Volume 1, Issue 2, 2008, Page 118-132]

  • Perforated Twist Tape Insert Experimental Study of Parabolic Trough Receiver with Perforated Twisted Tape Insert Using Fuzzy Model Analysis [Volume 12, Issue 2, 2021, Page 130-138]

  • Performance Characteristics Experimental study on thermal performance of counter flow wet cooling tower and effect of fins angle [Volume 10, Issue 1, 2019, Page 1-8]

  • Performance Indexes Fuzzy Reliability-Vulnerability for Evaluation of Water Supply System Performance [Volume 10, Issue 1, 2019, Page 72-82]

  • Periodic Load Study of Multi-Cracked Cantilever Composite Beams Subjected to External Moving Load [Volume 10, Issue 1, 2019, Page 27-34]

  • Permutation Modified Key Model of Data Encryption Standard [Volume 3, Issue 1, 2010, Page 20-33]

  • Phase Change Materials Use of Phase Change Material in Residential Walls to Reduce Cooling Load [Volume 4, Issue 1, 2011, Page 72-86]

  • Phase Matrix A Proposed Improvement Model for MC-CDMA in Selective Fading Channel [Volume 2, Issue 1, 2009, Page 1-10]

  • Phosphogepsum Modification of (Hiet-Abojeer) Asphalt Properties Using Wastes of Cement and Fertilizer Plant to Increase Area of Its Application [Volume 4, Issue 1, 2011, Page 153-174]

  • Photovoltaic/Thermal Methodologies Employed to Cool Photovoltaic Modules for Enhancing Efficiency: A Review [Volume 13, Issue 2, 2022, Page 49-62]

  • Physical environment Analyzing kindergarten's Interior Spaces for Enhancing Children's Creativity Erbil City as a Case Study [Volume 13, Issue 1, 2022, Page 85-97]

  • Physical Mod Experimental Investigation about the Parameters that Effect on Evap-oration from Sub-storage Reservoir [Volume 9, Issue 1, 2018, Page 260-266]

  • Pipe Manufacturing Industry Improving Productivity Employ Simulation Model: A Case Study of a Steel Pipe Manufacturing Company [Volume 13, Issue 1, 2022, Page 35-45]

  • Plastic aggregate Experimental Investigation on the Efficacy of Polyethylene Aggregate on Impact Resistance of Concrete Slab [Volume 10, Issue 1, 2019, Page 9-15]

  • Plate Effect of Layers Arrangement on the response of Sandwich Composite Cantilever Plate [Volume 2, Issue 1, 2009, Page 82-95]

  • PLC Preparing a PLC Program for the Kiln Entrance of Ceramic [Volume 2, Issue 2, 2009, Page 82-94]

  • PLC Practical Implementation of SCADA System for Falluja Substation [Volume 2, Issue 2, 2009, Page 28-46]

  • PLC Manufacturing of Electro-hydraulic Elevator System Controlled by PLC [Volume 11, Issue 2, 2020, Page 162-169]

  • PLC A Review on Recent Techniques for Boiler Tubes Corrosion Protection and Fouling Mitigation Using PLC [Volume 11, Issue 2, 2020, Page 184-191]

  • Pollution TAIL PLANE DESIGN FOR SATISFYING LONGITUDINAL HANDLING QUALITIES [Volume 1, Issue 2, 2008, Page 1-14]

  • Pollution THE EFFECT OF NOISE STUDY AT CITY PLANNING FOR SPECIFYING THE USES OF LAND [Volume 1, Issue 2, 2008, Page 133-142]

  • Pollution Evaluation and treatment of waste water effect on groundwater quality (the University of Anbar area as a case study) [Volume 12, Issue 2, 2021, Page 139-145]

  • Polyester EXPERIMENTAL INVESTIGATION AND NONLINEAR ANALYSIS OF POLYMER MEMBERS SUBJECTED TO UNIAXIAL TENSION [Volume 1, Issue 2, 2008, Page 87-97]

  • Polyester TAIL PLANE DESIGN FOR SATISFYING LONGITUDINAL HANDLING QUALITIES [Volume 1, Issue 2, 2008, Page 1-14]

  • Polyethylene Experimental Investigation on the Efficacy of Polyethylene Aggregate on Impact Resistance of Concrete Slab [Volume 10, Issue 1, 2019, Page 9-15]

  • Polyvinyl Butyral Film Characterizations of Hybrid Composites of Linen /Glass Fibers for Automotive and Transportation Applications [Volume 13, Issue 2, 2022, Page 114-121]

  • Porous Medium TAIL PLANE DESIGN FOR SATISFYING LONGITUDINAL HANDLING QUALITIES [Volume 1, Issue 2, 2008, Page 1-14]

  • Porous Medium AIDING AND OPPOSING MIXED CONVECTION FROM AN ARRAY OF CIRCULAR CYLINDERS IN A SATURATED POROUS MEDIUM [Volume 1, Issue 2, 2008, Page 15-26]

  • Porous Medium On the Effect of Flow Direction on Mixed Convection from a Horizontal Cylinder in a Saturated Porous Medium [Volume 1, Issue 1, 2008, Page 77-87]

  • Porous Titanium Compression and Wear Properties of Biocompatible Commercially Pure Titanium and (Titanium-Silicon) Alloys [Volume 10, Issue 1, 2019, Page 54-60]

  • Post Weld Heat Treatment Mechanical Properties of Welded Martensitic Stainless Steel (AISI420) Subject to Different Heat Treatment [Volume 11, Issue 1, 2020, Page 12-18]

  • Pre Cyclic Torsion Behavior of Prestressed Concrete Beams [Volume 9, Issue 1, 2018, Page 233-244]

  • Predicted Model Speed Flow Density Models Prediction for Urban Roadway in Falluja City [Volume 4, Issue 1, 2011, Page 1-16]

  • Predicting Predicting the Daily Evaporation in Ramadi City by Using Artificial Neural Network [Volume 8, Issue 1, 2017, Page 134-139]

  • Prediction Investigation of Surface Quality in Bezier Technique for Machining Al7025 Alloy Using CNC Turning [Volume 14, Issue 2, 2023, Page 1-11]

  • Pressure drop Influence of Various Types of Twisted Tape inserts on Hydrody-namic, Pressure Drop and Thermal Heat Performance in Heat Ex-changers: A Review Study [Volume 12, Issue 1, 2021, Page 29-46]

  • Problematic soil Use of waste stone powder to improve performance of problematic soils - A Review. [Volume 14, Issue 2, 2023, Page 27-39]

  • Product Design Multi-Objective GA-Based Optimization to Maximize Sustainability for Product Design and Manufacturing [Volume 9, Issue 1, 2018, Page 195-201]

  • Productivity Improving Productivity Employ Simulation Model: A Case Study of a Steel Pipe Manufacturing Company [Volume 13, Issue 1, 2022, Page 35-45]

  • Progressive collapse Progressive Collapse Analyses of Buildings Subjected to Earthquake Loads [Volume 12, Issue 1, 2021, Page 10-19]

  • Pro-Model Improving Productivity Employ Simulation Model: A Case Study of a Steel Pipe Manufacturing Company [Volume 13, Issue 1, 2022, Page 35-45]

  • Properties of Soils Using water treatment sludge to Improve Geotechnical Engineering Properties of Soils: A Review [Volume 14, Issue 1, 2023, Page 50-65]

  • PSNR New Quality Metric for Compressed Images [Volume 11, Issue 2, 2020, Page 154-161]

  • Pulse Repetition Rate Effect of Pulse Repetition Rate on Micro Hardness on the Surface and Cross Section of Gray Cast Iron by using ND-YAG Laser [Volume 10, Issue 1, 2019, Page 67-71]

  • PV/T collector Experimental Investigation of the Optimum Angle for the Hybrid PV/T Collector [Volume 13, Issue 1, 2022, Page 1-12]

  • PV/T collector Optimizing Sentiment Big Data Classification Using Multilayer Perceptron [Volume 13, Issue 2, 2022, Page 14-21]

  • PWHT Mechanical Properties of Welded Martensitic Stainless Steel (AISI420) Subject to Different Heat Treatment [Volume 11, Issue 1, 2020, Page 12-18]

Q

  • QAM Two Dimensional Wavelet Transform Model for OFDM System [Volume 2, Issue 2, 2009, Page 58-68]

  • QFD Develop QFD and AHP Models for Liquid Gas Valve for Product Developmen [Volume 11, Issue 1, 2020, Page 25-32]

  • Quantum Unconditionally Secure Authentication in Quantum Key Distribution [Volume 1, Issue 1, 2008, Page 59-76]

R

  • Radiator Enhancing the effectiveness of the cooling system for automotive engine by employing different nanofluids: literature review [Volume 13, Issue 1, 2022, Page 53-58]

  • Ramadi city Evaluation of Parking Areas in Ramadi CBD [Volume 4, Issue 1, 2011, Page 131-152]

  • Randam parameters Tobit model Evaluation the effect of some traffic characteristics on the safety performance of intersections. [Volume 11, Issue 2, 2020, Page 130-136]

  • Random Forest Detection of Obesity Stages Using Machine Learning Algorithms [Volume 14, Issue 1, 2023, Page 80-88]

  • RAP Rutting Performance of Asphalt Layers Mixtures with Inclusion RAP Materials [Volume 12, Issue 2, 2021, Page 203-210]

  • Rayleigh Study of WMAN Physical Layer under Fading Channels [Volume 7, Issue 1, 2016, Page 21-31]

  • RBFNN Nonlinear Response of Uniformly Loaded Paddle Cantilever Based upon Intelligent Techniques [Volume 4, Issue 2, 2011, Page 60-69]

  • RC beam Torsional Behavior of Strengthened Reinforced Concrete Beams by CFRP Sheets: Parametric study [Volume 12, Issue 2, 2021, Page 229-244]

  • RC beam Strengthening Reinforced Beams Subjected to Pure Torsion by Near Surface Mounted Rebars [Volume 13, Issue 1, 2022, Page 13-22]

  • Reactive powder Some Mechanical Properties of Reactive PowderLight Weight Concrete [Volume 4, Issue 1, 2011, Page 47-61]

  • Reactive powder concrete Increasing ultimate strength of reinforced concrete slab by using Reactive Powder Concrete and study the effect of high temperature on them [Volume 10, Issue 1, 2019, Page 16-26]

  • Readiness Evaluation of Overall Resource Effectiveness for Job Shop Production System [Volume 10, Issue 2, 2019, Page 362-371]

  • Real-valued DFT(RDFT) Direct Algorithm for Computation of Inverse Real Fast Fourier Transform (IRDFT) [Volume 14, Issue 2, 2023, Page 19-27]

  • Rectangular Deep Beam Shear Strength of Directly and Indirectly Loaded Rectangular Self - Compacted Reinforced Concrete Deep Beams Containing Recycled Concrete as Coarse Aggregate [Volume 11, Issue 2, 2020, Page 121-129]

  • Rectangular plates Dynamical effects of the impact of falling mass on stiffened rectangular plate [Volume 5, Issue 1, 2012, Page 64-75]

  • Recycled asphalt pavement The Effect of CKD and RAP on the Mechanical Properties of Subgrade Soils [Volume 13, Issue 1, 2022, Page 98-107]

  • Recycles Modification of (Hiet-Abojeer) Asphalt Properties Using Wastes of Cement and Fertilizer Plant to Increase Area of Its Application [Volume 4, Issue 1, 2011, Page 153-174]

  • Recycling Evaluate the granite waste efficiency in the construction using statistical indicators [Volume 14, Issue 1, 2023, Page 66-72]

  • Recycling Aluminum Cans Effect of Adding Degassing (Ar-N2) on Hardness and Microstructure of Recycling Aluminum Cans [Volume 11, Issue 1, 2020, Page 38-42]

  • Reflection TAIL PLANE DESIGN FOR SATISFYING LONGITUDINAL HANDLING QUALITIES [Volume 1, Issue 2, 2008, Page 1-14]

  • Reflection STUDING THE PRINCIPAL VARIABLES AT THE AUDITORIUM ROOMS TO SPECIFY THE COUSTIC PERFORMANCE EFFECIENCY [Volume 1, Issue 2, 2008, Page 163-179]

  • Regression Evaluate the granite waste efficiency in the construction using statistical indicators [Volume 14, Issue 1, 2023, Page 66-72]

  • Re-moval Efficiency Evaluation and treatment of waste water effect on groundwater quality (the University of Anbar area as a case study) [Volume 12, Issue 2, 2021, Page 139-145]

  • Repairable generalized model Prognostic Reliability Prediction for Repairable System Based on Non- Parametric Model [Volume 7, Issue 1, 2016, Page 42-49]

  • Repairable proportional hazard model Prognostic Reliability Prediction for Repairable System Based on Non- Parametric Model [Volume 7, Issue 1, 2016, Page 42-49]

  • Repairable proportional odd model Prognostic Reliability Prediction for Repairable System Based on Non- Parametric Model [Volume 7, Issue 1, 2016, Page 42-49]

  • Resistance STRUCTURAL BEHAVIOR OF COMPOSITE SLABS SUBJECTED TO IMPACT LOADING [Volume 8, Issue 1, 2017, Page 176-184]

  • Resistivity Modify the Performance of Electrical Transformer by Analysis Oil Aged and Paper Insulation with Nanoparticales [Volume 10, Issue 2, 2019, Page 372-381]

  • Reverse engineering Free-Form Surfaces Design Using Reverse Engineering Depending on Cross-Sectional Design Method [Volume 5, Issue 1, 2012, Page 41-50]

  • Reverse Osmosis (RO) Review on Technology-Based on Reverse Osmosis [Volume 14, Issue 1, 2023, Page 89-97]

  • Review Euphrates River Water Quality Studies in Iraq: Critical Review [Volume 10, Issue 1, 2019, Page 61-66]

  • Rice Study of WMAN Physical Layer under Fading Channels [Volume 7, Issue 1, 2016, Page 21-31]

  • River Euphrates River Water Quality Studies in Iraq: Critical Review [Volume 10, Issue 1, 2019, Page 61-66]

  • Road Construction Contract Implications Of Cash Flow Forecasting On Highway Projects In Iraq [Volume 7, Issue 1, 2016, Page 56-62]

  • Rotor performance Optimum performance of rotor blade with different airfoil for Primus Wind power AIR 40 Wind Turbine 12VDC [Volume 12, Issue 1, 2021, Page 57-64]

  • Rounds Modified Key Model of Data Encryption Standard [Volume 3, Issue 1, 2010, Page 20-33]

  • Routing Performance Evaluation of AODV Routing Protocol in MANET using OPNET Simulator [Volume 5, Issue 2, 2012, Page 241-257]

  • RSC Performance Analysis of Serial Concatenation Convolutional Codes Based on Amplitude Matrix [Volume 2, Issue 2, 2009, Page 1-16]

  • RTU Practical Implementation of SCADA System for Falluja Substation [Volume 2, Issue 2, 2009, Page 28-46]

  • Rutting Rutting Performance of Asphalt Layers Mixtures with Inclusion RAP Materials [Volume 12, Issue 2, 2021, Page 203-210]

S

  • Salutogenic factors The impact of Salutogenic factors on the process of patient’s recovery Case study; Erbil city hospitals [Volume 11, Issue 2, 2020, Page 137-153]

  • Sandwich Effect of Layers Arrangement on the response of Sandwich Composite Cantilever Plate [Volume 2, Issue 1, 2009, Page 82-95]

  • Sandwich panel Hoff's Investigation of The Sandwich Panel with Honeycomb Core [Volume 13, Issue 2, 2022, Page 63-68]

  • Satellite Communication Scintillation Effect on Satellite Communications within Standard Atmosphere [Volume 2, Issue 2, 2009, Page 17-27]

  • SBR polymer Effect of Polymer SBR on Strength Reduction in Concrete Immersed in Drainage and Ground Water [Volume 12, Issue 2, 2021, Page 168-176]

  • SCADA Practical Implementation of SCADA System for Falluja Substation [Volume 2, Issue 2, 2009, Page 28-46]

  • Scallop height Feed-Interval Scallop Height Estimation Using Multi-axis CNC Milling Machine [Volume 5, Issue 1, 2012, Page 51-63]

  • SCC Study of Some Durability Properties of Self-compacting Concrete Containing Waste Polyethylene Terephthalate [Volume 14, Issue 1, 2023, Page 15-30]

  • SCCCs Performance Analysis of Serial Concatenation Convolutional Codes Based on Amplitude Matrix [Volume 2, Issue 2, 2009, Page 1-16]

  • S DYNA Dynamical effects of the impact of falling mass on stiffened rectangular plate [Volume 5, Issue 1, 2012, Page 64-75]

  • SEEP/W Emperical and Numerical Solution Of Seepage Problems Underneath Hydraulic Structures [Volume 12, Issue 1, 2021, Page 1-9]

  • SEEP/W Analysis of seepage through Al-Wand Dam by using SEEP/W ModelAnalysis of seepage through Al-Wand Dam by using SEEP/W Model [Volume 11, Issue 1, 2020, Page 33-37]

  • Seismic load Progressive Collapse Analyses of Buildings Subjected to Earthquake Loads [Volume 12, Issue 1, 2021, Page 10-19]

  • Selective Fading A Proposed Improvement Model for MC-CDMA in Selective Fading Channel [Volume 2, Issue 1, 2009, Page 1-10]

  • Self-Compacting Concrete SCC Properties of Sustainable Self- compacting Concrete Containing Treated and Modified Waste Plastic Fibers [Volume 13, Issue 1, 2022, Page 23-34]

  • Semisolid Optimization of Casting Conditions for Semi-Solid A356 Aluminum Alloy [Volume 10, Issue 1, 2019, Page 44-53]

  • Sensors Nonlinear Response of Uniformly Loaded Paddle Cantilever Based upon Intelligent Techniques [Volume 4, Issue 2, 2011, Page 60-69]

  • Shatt Al-Arab River The use of multivariate statistical techniques in the assessment of river water quality [Volume 11, Issue 2, 2020, Page 102-112]

  • Shear Capaci-ty Effect of Anchorage Length on the Shear Capacity of High Strength Concrete Deep Beams [Volume 12, Issue 1, 2021, Page 47-56]

  • Shear Strength Investigation of Clayey and Sandy Soil Characteristics Polluted with Crude Oil [Volume 12, Issue 1, 2021, Page 100-107]

  • Shear Strength Shear Strength of Directly and Indirectly Loaded Rectangular Self - Compacted Reinforced Concrete Deep Beams Containing Recycled Concrete as Coarse Aggregate [Volume 11, Issue 2, 2020, Page 121-129]

  • Sic Effect of SiC Addition the on Adhesive Wear Resistance of 6061 T6 Aluminum Alloy [Volume 5, Issue 2, 2012, Page 271-278]

  • SiC percentages Effect of SiC Addition the on Adhesive Wear Resistance of 6061 T6 Aluminum Alloy [Volume 5, Issue 2, 2012, Page 271-278]

  • SIGMA Key Exchange Protocol Supporting Mobility and Multihoming [Volume 1, Issue 1, 2008, Page 11-30]

  • Signalized intersection Evaluation and Improvement of Traffic Operation for Al-Zeoat Intersection in Al-Ramadi City [Volume 3, Issue 2, 2010, Page 46-57]

  • Simulink Design and Implementing of a Buck Dc-To-Dc Converter into the DC Motor's Speed Controller in Matlab/Simulink [Volume 13, Issue 2, 2022, Page 36-41]

  • Small wind tur- Optimum performance of rotor blade with different airfoil for Primus Wind power AIR 40 Wind Turbine 12VDC [Volume 12, Issue 1, 2021, Page 57-64]

  • SMF Sheet Formability Using Hemi-Spherical Punch AndRubber Die [Volume 3, Issue 2, 2010, Page 58-71]

  • Soil improvement and stabilization Use of waste stone powder to improve performance of problematic soils - A Review. [Volume 14, Issue 2, 2023, Page 27-39]

  • Soils Using water treatment sludge to Improve Geotechnical Engineering Properties of Soils: A Review [Volume 14, Issue 1, 2023, Page 50-65]

  • Soil Suction Nature of Soil-Water Characteristics Curves (SWCC)for Soils from Anbar Governorate [Volume 3, Issue 1, 2010, Page 61-80]

  • Solan Review of modern applications of solar cells in communication systems [Volume 13, Issue 2, 2022, Page 133-146]

  • Solani River Delineation of Prospecting Zones of Groundwater Using Remote Sensing and Geographic Information System (GIS): A case Study of Solani River Basin [Volume 7, Issue 1, 2016, Page 7-13]

  • Solar cells Review of modern applications of solar cells in communication systems [Volume 13, Issue 2, 2022, Page 133-146]

  • Solar collector Experimental and Theoretical Study of a Parabolic Trough Solar Collector [Volume 5, Issue 1, 2012, Page 109-125]

  • Solar energy An Experimental Study Of A Solar Water Heater Of Prismatic Right Triangular Cross-Section Area [Volume 4, Issue 2, 2011, Page 94-111]

  • Solar energy Prediction of Thermal Characteristics For Solar Water Heater [Volume 4, Issue 2, 2011, Page 18-32]

  • Solar heater Prediction of Thermal Characteristics For Solar Water Heater [Volume 4, Issue 2, 2011, Page 18-32]

  • Solar Power Satellite Review of modern applications of solar cells in communication systems [Volume 13, Issue 2, 2022, Page 133-146]

  • Solar thermal perfor-mance Artificial Neural Networks Modeling of Heat Transfer Characteris-tics in a Parabolic Trough Solar Collector using Nano-Fluids [Volume 12, Issue 2, 2021, Page 245-255]

  • Sound A proposed new formula to determine the sound insulation of concrete walls [Volume 2, Issue 2, 2009, Page 117-128]

  • SOVA Performance Analysis of Serial Concatenation Convolutional Codes Based on Amplitude Matrix [Volume 2, Issue 2, 2009, Page 1-16]

  • Spatial Building of a Spatial Database to Identify Areas of Contamination by Mines and Hazardous Remnants of War by Using GIS (Analytical Study / Basra Governorate) [Volume 9, Issue 1, 2018, Page 252-259]

  • Spectral Distortion IHS Image Fusion Based on Gray Wolf Optimizer (GWO) [Volume 13, Issue 1, 2022, Page 65-75]

  • Spillway Numerical model Physical model Flow-3D Ansys Fluent Flow simulate Performance Study of Fluent-2D and Flow-3D Platforms in the CFD Modeling of a Flow Pattern Over Ogee Spillway [Volume 11, Issue 2, 2020, Page 221-230]

  • Spring Back Effect of Cross- Rolling on Mechanical Properties and Spring - Back of Aluminum 6061 Alloy [Volume 14, Issue 2, 2023, Page 12-18]

  • SRM Thermal Analysis of Switched Reluctance Motor Based on RMXprt/Motor-CAD [Volume 14, Issue 1, 2023, Page 7-14]

  • SSIM New Quality Metric for Compressed Images [Volume 11, Issue 2, 2020, Page 154-161]

  • Stacking sequence Transient Interlaminar Thermal Stress Analysis of angle-ply Silicon/Lithium Aluminosilicate Composite plate [Volume 2, Issue 2, 2009, Page 47-57]

  • Stainless Steel High Temperature Cyclic Oxidation of Yttrium Modified Aluminide Diffusion Coatings of Stainless Steel [Volume 2, Issue 1, 2009, Page 61-70]

  • Standard Atmosphere Scintillation Effect on Satellite Communications within Standard Atmosphere [Volume 2, Issue 2, 2009, Page 17-27]

  • Static analysis Static analysis of two-directional functionally graded cylindrical panels under the effect of symmetric loads using finite element method (FEM) [Volume 10, Issue 2, 2019, Page 408-424]

  • Static Loa EFFECT OF ADDING RECYCLED PLASTIC FIBERS TO CONCRETE ON THE STATIC PROPERTIES OF CONCRETE TILES [Volume 11, Issue 1, 2020, Page 53-59]

  • Steam boiler A Review on Recent Techniques for Boiler Tubes Corrosion Protection and Fouling Mitigation Using PLC [Volume 11, Issue 2, 2020, Page 184-191]

  • Steel Fiber Some Mechanical Properties of Reactive PowderLight Weight Concrete [Volume 4, Issue 1, 2011, Page 47-61]

  • Stiffened plates Dynamical effects of the impact of falling mass on stiffened rectangular plate [Volume 5, Issue 1, 2012, Page 64-75]

  • Strain Effect of Layers Arrangement on the response of Sandwich Composite Cantilever Plate [Volume 2, Issue 1, 2009, Page 82-95]

  • Stratified Soils Numerical Modelling and Experimental Investigation of Water Distribution in Stratified Soil Under Subsurface Trickle [Volume 11, Issue 2, 2020, Page 94-101]

  • Strength capacity STRUCTURAL BEHAVIOR OF COMPOSITE SLABS SUBJECTED TO IMPACT LOADING [Volume 8, Issue 1, 2017, Page 176-184]

  • Structure From Motion 3D Reconstruction by Structure from Motion Approach for Heritage Documentation [Volume 14, Issue 1, 2023, Page 31-39]

  • Sub Experimental Investigation about the Parameters that Effect on Evap-oration from Sub-storage Reservoir [Volume 9, Issue 1, 2018, Page 260-266]

  • Subgrade The Effect of CKD and RAP on the Mechanical Properties of Subgrade Soils [Volume 13, Issue 1, 2022, Page 98-107]

  • Sulphate Study of Some Durability Properties of Self-compacting Concrete Containing Waste Polyethylene Terephthalate [Volume 14, Issue 1, 2023, Page 15-30]

  • Supplementary irrigation system Evaluating the Effect of Supplementary Irrigation on Improvement of Economic Water Productivity for Winter Wheat [Volume 11, Issue 1, 2020, Page 60-65]

  • Surface Roughness Feed-Interval Scallop Height Estimation Using Multi-axis CNC Milling Machine [Volume 5, Issue 1, 2012, Page 51-63]

  • Surface Roughness Prediction of Surface Quality in Electrical Discharge Machining Process for 7024 AL Alloy Using Artificial Neural Network Model [Volume 13, Issue 2, 2022, Page 106-113]

  • Surface Roughness Study the effects of milling parameters on surface roughness for Low Carbon Steel AISI 1015 [Volume 14, Issue 1, 2023, Page 1-6]

  • Surface Roughness Investigation of Surface Quality in Bezier Technique for Machining Al7025 Alloy Using CNC Turning [Volume 14, Issue 2, 2023, Page 1-11]

  • Sustainable technology,, Sustainable Technology In The Implementation Of Prefabricated Concrete Schools [Volume 14, Issue 2, 2023, Page 53-63]

  • SVM Nonlinear Response of Uniformly Loaded Paddle Cantilever Based upon Intelligent Techniques [Volume 4, Issue 2, 2011, Page 60-69]

  • Swept angles Theoretical and Experimental Study of a Forward Swept Wing [Volume 3, Issue 2, 2010, Page 15-30]

  • SYNCHRO 10.0 Assessment Performance at Al- Thawra Signalized Intersection in Babil City [Volume 13, Issue 2, 2022, Page 84-90]

  • Synchronous generator Investigation of Frequency Reduction Behavior on Three Phase Synchronous Generator And Transformer [Volume 4, Issue 1, 2011, Page 17-33]

T

  • Taguchi Study the effects of milling parameters on surface roughness for Low Carbon Steel AISI 1015 [Volume 14, Issue 1, 2023, Page 1-6]

  • Taguchi method Investigation of Milling Parameters Effect on Material Removal Rate Using Taguchi and Artificial Neural Network Techniques [Volume 10, Issue 1, 2019, Page 83-88]

  • Taguchi method Study the Effect of Cutting Parameters of Abrasive Water Jet Process on Aluminum Alloy 5083 [Volume 13, Issue 2, 2022, Page 99-105]

  • Tail Design TAIL PLANE DESIGN FOR SATISFYING LONGITUDINAL HANDLING QUALITIES [Volume 1, Issue 2, 2008, Page 1-14]

  • Takeoff and Landing Effect of Paving Runway and Atmospheric Conditions on Airplane Takeoff Distance and Time [Volume 10, Issue 2, 2019, Page 382-392]

  • TAZ Modal Split Model Using Multiple Linear Regression Analysis [Volume 12, Issue 2, 2021, Page 222-228]

  • TCs Integration Environmental Aspects onto Customer Requirement to Develop Green Quality Function Deployment [Volume 11, Issue 1, 2020, Page 66-78]

  • TDS A Review on Recent Techniques for Boiler Tubes Corrosion Protection and Fouling Mitigation Using PLC [Volume 11, Issue 2, 2020, Page 184-191]

  • Tensile Load TAIL PLANE DESIGN FOR SATISFYING LONGITUDINAL HANDLING QUALITIES [Volume 1, Issue 2, 2008, Page 1-14]

  • Tensile Load STUDYING THE EFFECT OF CUTOUTS ON THE COMPOSITE LAMINATE PLATES [Volume 1, Issue 2, 2008, Page 69-77]

  • Tension Softening EXPERIMENTAL INVESTIGATION AND NONLINEAR ANALYSIS OF POLYMER MEMBERS SUBJECTED TO UNIAXIAL TENSION [Volume 1, Issue 2, 2008, Page 87-97]

  • Tension Softening TAIL PLANE DESIGN FOR SATISFYING LONGITUDINAL HANDLING QUALITIES [Volume 1, Issue 2, 2008, Page 1-14]

  • Test The Effect Of Sodium Hydroxide On The Strength Of Kirkuk Soil – Cement Mixtures [Volume 5, Issue 2, 2012, Page 258-270]

  • Thermal Numerical Study Of Turbulent Thermal-Hydraulic Performance Of Al2o3-Water Nanofluid In Channel With Triangular Baffles [Volume 7, Issue 1, 2016, Page 13-20]

  • Thermal Thermal Analysis of Switched Reluctance Motor Based on RMXprt/Motor-CAD [Volume 14, Issue 1, 2023, Page 7-14]

  • Thermal collector Prediction of Thermal Characteristics For Solar Water Heater [Volume 4, Issue 2, 2011, Page 18-32]

  • Thermal comfort Investigation of human thermal comfort and improvement in public places adapted to a hot climate in Iraq [Volume 10, Issue 2, 2019, Page 349-361]

  • Thermal comfort Air conditioning Turbulence k-є predicted mean vote Numerical study of thermal comfort levels in a conference hall [Volume 11, Issue 2, 2020, Page 170-183]

  • Thermal Developing A Numerical Study of Buoyancy Effect on Thermal Development in a Horizontal Annulus Sector [Volume 2, Issue 2, 2009, Page 95-116]

  • Thermal Energy Storage Experimental Investigation of Heat Reduction through Walls Using Phase Change Material [Volume 9, Issue 1, 2018, Page 245-251]

  • Thermal heat performance Influence of Various Types of Twisted Tape inserts on Hydrody-namic, Pressure Drop and Thermal Heat Performance in Heat Ex-changers: A Review Study [Volume 12, Issue 1, 2021, Page 29-46]

  • Thermal hydraulic performance Numerical Investigation on the Thermal Performance of Double Pipe Heat Exchanger Using Different Shapes of Fins [Volume 10, Issue 2, 2019, Page 326-348]

  • Thermal-hydraulic performance Numerical Study on Hydrothermal Performance Factor Using Jet impingement and Nanofluid [Volume 10, Issue 2, 2019, Page 308-315]

  • Thermal isolation Effect of Using Palm Wastes as Additive to Unsaturated Polyester on the Thermal and Acoustic Isolation Properties of a Composite Materials [Volume 9, Issue 1, 2018, Page 202-209]

  • Thermal per-formance Numerical Investigation of Hydraulic-Thermal Performance for a Double-Pipe Heat Exchanger Equipped with 45°-Helical Ribs [Volume 12, Issue 2, 2021, Page 193-202]

  • Threshold TAIL PLANE DESIGN FOR SATISFYING LONGITUDINAL HANDLING QUALITIES [Volume 1, Issue 2, 2008, Page 1-14]

  • Threshold THE EFFECT OF NOISE STUDY AT CITY PLANNING FOR SPECIFYING THE USES OF LAND [Volume 1, Issue 2, 2008, Page 133-142]

  • TiO2/ H2O nano fluids Artificial Neural Networks Modeling of Heat Transfer Characteris-tics in a Parabolic Trough Solar Collector using Nano-Fluids [Volume 12, Issue 2, 2021, Page 245-255]

  • Ti-Si Compression and Wear Properties of Biocompatible Commercially Pure Titanium and (Titanium-Silicon) Alloys [Volume 10, Issue 1, 2019, Page 54-60]

  • Tool Life A Neural Network Cutting Fluid Effect on Surface Roughness and Tool Life [Volume 4, Issue 1, 2011, Page 34-46]

  • Traditional Architecture Contemporary Arabic ArchitectureAnd It’s Local Specialism [Volume 3, Issue 2, 2010, Page 125-144]

  • Traffic analysis zones Modal Split Model Using Multiple Linear Regression Analysis [Volume 12, Issue 2, 2021, Page 222-228]

  • Traffic operation Evaluation and Improvement of Traffic Operation for Al-Zeoat Intersection in Al-Ramadi City [Volume 3, Issue 2, 2010, Page 46-57]

  • Traffic problems Evaluation of transportation network in AL- Fallujah city [Volume 12, Issue 2, 2021, Page 146-156]

  • Transformer Investigation of Frequency Reduction Behavior on Three Phase Synchronous Generator And Transformer [Volume 4, Issue 1, 2011, Page 17-33]

  • Transformer Modify the Performance of Electrical Transformer by Analysis Oil Aged and Paper Insulation with Nanoparticales [Volume 10, Issue 2, 2019, Page 372-381]

  • Transient thermal stress Transient Interlaminar Thermal Stress Analysis of angle-ply Silicon/Lithium Aluminosilicate Composite plate [Volume 2, Issue 2, 2009, Page 47-57]

  • Transmitting and Receiving circuit Transmitting and Receiving Ultrasound Wave Based on Laser Light [Volume 11, Issue 1, 2020, Page 1-5]

  • Transport The Engineering dimensions and its impact on the sustainability on the roads network in Ramadi city [Volume 12, Issue 2, 2021, Page 157-167]

  • Transportation networks Evaluation of transportation network in AL- Fallujah city [Volume 12, Issue 2, 2021, Page 146-156]

  • Trapezoidal Effect Orientation on Performance of Longitudinal (Trapezoidal) Fins Heat Sink Subjected to Natural Convection [Volume 2, Issue 2, 2009, Page 69-81]

  • Trapezoidal baffles Nanofluid Thermal Numerical Study on the Convective Heat Transfer of Nanofluid Flow in Channel with Trapezoidal Baffles [Volume 9, Issue 1, 2018, Page 185-194]

  • Treatment TAIL PLANE DESIGN FOR SATISFYING LONGITUDINAL HANDLING QUALITIES [Volume 1, Issue 2, 2008, Page 1-14]

  • Treatment THE EFFECT OF NOISE STUDY AT CITY PLANNING FOR SPECIFYING THE USES OF LAND [Volume 1, Issue 2, 2008, Page 133-142]

  • Triangular baffles Numerical Study Of Turbulent Thermal-Hydraulic Performance Of Al2o3-Water Nanofluid In Channel With Triangular Baffles [Volume 7, Issue 1, 2016, Page 13-20]

  • Triangular Duct TAIL PLANE DESIGN FOR SATISFYING LONGITUDINAL HANDLING QUALITIES [Volume 1, Issue 2, 2008, Page 1-14]

  • Triangular Duct EFFECT OF VORTEX GENERATORS ON A FRICTION FACTOR IN AN EQUILATERAL TRIANGULAR DUCT [Volume 1, Issue 2, 2008, Page 78-86]

  • Triangular ribs Thermal hydraulic performance Turbulent Flow Nanofluids Entropy generation Numerical Investigation on heat transfer enhancement and entropy generation in a triangular ribbed-channel using nanofluid [Volume 12, Issue 1, 2021, Page 65-75]

  • Tropospheric Scintillation Scintillation Effect on Satellite Communications within Standard Atmosphere [Volume 2, Issue 2, 2009, Page 17-27]

  • Tube banks TAIL PLANE DESIGN FOR SATISFYING LONGITUDINAL HANDLING QUALITIES [Volume 1, Issue 2, 2008, Page 1-14]

  • Tube banks AIDING AND OPPOSING MIXED CONVECTION FROM AN ARRAY OF CIRCULAR CYLINDERS IN A SATURATED POROUS MEDIUM [Volume 1, Issue 2, 2008, Page 15-26]

  • Tube banks Numerical Study of Fluid Flow and Heat Transfer over a Bank of Oval-Tubes Heat Exchanger with Vortex Generators [Volume 5, Issue 1, 2012, Page 88-108]

  • Turbidity Evaluation and treatment of waste water effect on groundwater quality (the University of Anbar area as a case study) [Volume 12, Issue 2, 2021, Page 139-145]

  • Turbulent flow Effect of Delta–Winglet Vortex Generators on a Forced Convection Heat Transfer in an Asymmetrically Heated Triangular Duct [Volume 1, Issue 1, 2008, Page 31-44]

  • Turbulent flow Numerical Study Of Turbulent Thermal-Hydraulic Performance Of Al2o3-Water Nanofluid In Channel With Triangular Baffles [Volume 7, Issue 1, 2016, Page 13-20]

  • Twisted tape inserts Influence of Various Types of Twisted Tape inserts on Hydrody-namic, Pressure Drop and Thermal Heat Performance in Heat Ex-changers: A Review Study [Volume 12, Issue 1, 2021, Page 29-46]

  • Two directional functionally Static analysis of two-directional functionally graded cylindrical panels under the effect of symmetric loads using finite element method (FEM) [Volume 10, Issue 2, 2019, Page 408-424]

  • Type collector Prediction of Thermal Characteristics For Solar Water Heater [Volume 4, Issue 2, 2011, Page 18-32]

  • Types III and IV Vessels Prediction of First Ply Failure of Composite Pressure Vessels Under Internal Pressure: A review [Volume 13, Issue 1, 2022, Page 76-84]

  • Tyre rubber Effect of Crumb Tyres Rubber on Some Properties of Foamed Concrete [Volume 4, Issue 2, 2011, Page 1-17]

U

  • UCS The Effect of CKD and RAP on the Mechanical Properties of Subgrade Soils [Volume 13, Issue 1, 2022, Page 98-107]

  • UGS program Free-Form Surfaces Design Using Reverse Engineering Depending on Cross-Sectional Design Method [Volume 5, Issue 1, 2012, Page 41-50]

  • Ultrasonic Pulse Velocity Experimental Investigation on the Efficacy of Polyethylene Aggregate on Impact Resistance of Concrete Slab [Volume 10, Issue 1, 2019, Page 9-15]

  • Ultrasound Frequency Transmitting and Receiving Ultrasound Wave Based on Laser Light [Volume 11, Issue 1, 2020, Page 1-5]

  • Under Frequency Investigation of Frequency Reduction Behavior on Three Phase Synchronous Generator And Transformer [Volume 4, Issue 1, 2011, Page 17-33]

  • Universal hashing Unconditionally Secure Authentication in Quantum Key Distribution [Volume 1, Issue 1, 2008, Page 59-76]

  • Unmodified clay Unmodified and Organo-Modified clay content effect on Mechanical and Thermal Properties of the Waste Low Density Polyethylene [Volume 8, Issue 1, 2017, Page 140-147]

  • Unsaturated polyester Effect of Using Palm Wastes as Additive to Unsaturated Polyester on the Thermal and Acoustic Isolation Properties of a Composite Materials [Volume 9, Issue 1, 2018, Page 202-209]

  • Unsaturated soil Nature of Soil-Water Characteristics Curves (SWCC)for Soils from Anbar Governorate [Volume 3, Issue 1, 2010, Page 61-80]

  • Upper Euphrates Sustainable Management of Water Resources in The Upper Euphrates Basin-Iraq [Volume 11, Issue 2, 2020, Page 211-220]

  • Urban The Engineering dimensions and its impact on the sustainability on the roads network in Ramadi city [Volume 12, Issue 2, 2021, Page 157-167]

  • Urban Road Network The Engineering dimensions and its impact on the sustainability on the roads network in Ramadi city [Volume 12, Issue 2, 2021, Page 157-167]

V

  • Value Added Time The Impact of Inventories on the Leanness of Job Shop Production System [Volume 10, Issue 2, 2019, Page 425-435]

  • Variable speed compressor Developing of a Fuzzy Logic Controller for Air Conditioning System [Volume 5, Issue 2, 2012, Page 180-187]

  • VAT The Impact of Inventories on the Leanness of Job Shop Production System [Volume 10, Issue 2, 2019, Page 425-435]

  • Vector Quantization Image Compression Using Vector Quantization and Genetic Algorithms [Volume 1, Issue 1, 2008, Page 45-58]

  • Vegetable oil Experimental Study Of Vegetable Oil -Diesel Blends On The performance Of Compression Ignition Engine [Volume 4, Issue 2, 2011, Page 33-44]

  • Velocity Hydraulic Analysis of Fallujah Water Network By Using a Program EPANET [Volume 3, Issue 2, 2010, Page 112-124]

  • Ventilation and Air Developing of a Fuzzy Logic Controller for Air Conditioning System [Volume 5, Issue 2, 2012, Page 180-187]

  • VOC Integration Environmental Aspects onto Customer Requirement to Develop Green Quality Function Deployment [Volume 11, Issue 1, 2020, Page 66-78]

  • VOE Integration Environmental Aspects onto Customer Requirement to Develop Green Quality Function Deployment [Volume 11, Issue 1, 2020, Page 66-78]

  • Vortex Generator TAIL PLANE DESIGN FOR SATISFYING LONGITUDINAL HANDLING QUALITIES [Volume 1, Issue 2, 2008, Page 1-14]

  • Vortex Generator EFFECT OF VORTEX GENERATORS ON A FRICTION FACTOR IN AN EQUILATERAL TRIANGULAR DUCT [Volume 1, Issue 2, 2008, Page 78-86]

  • VSM The Impact of Inventories on the Leanness of Job Shop Production System [Volume 10, Issue 2, 2019, Page 425-435]

W

  • Waste management Effect of Crumb Tyres Rubber on Some Properties of Foamed Concrete [Volume 4, Issue 2, 2011, Page 1-17]

  • Waste materials mortar Study Some Mechanical Properties of Mortar with Sawdust as a Partially Replacement of Sand [Volume 5, Issue 1, 2012, Page 22-30]

  • Waste stone powder Use of waste stone powder to improve performance of problematic soils - A Review. [Volume 14, Issue 2, 2023, Page 27-39]

  • Water Adsorption Refractory Effect of Fire Clay Powder on The Properties of Ceramic Materials Produced by Using Kaolin [Volume 3, Issue 2, 2010, Page 72-77]

  • Water Deficit Sustainable Management of Water Resources in The Upper Euphrates Basin-Iraq [Volume 11, Issue 2, 2020, Page 211-220]

  • Water Distribution Numerical Modelling and Experimental Investigation of Water Distribution in Stratified Soil Under Subsurface Trickle [Volume 11, Issue 2, 2020, Page 94-101]

  • Water distribution System Hydraulic Analysis study and redesign of the water distribution system simulation using GIS- EPANET, case study: Laylan sub-district, Kirkuk city, Iraq [Volume 15, Issue 1, 2024, Page 1-16]

  • Water Management Sustainable Management of Water Resources in The Upper Euphrates Basin-Iraq [Volume 11, Issue 2, 2020, Page 211-220]

  • Water quality Euphrates River Water Quality Studies in Iraq: Critical Review [Volume 10, Issue 1, 2019, Page 61-66]

  • Water quality The use of multivariate statistical techniques in the assessment of river water quality [Volume 11, Issue 2, 2020, Page 102-112]

  • Water Supply System Fuzzy Reliability-Vulnerability for Evaluation of Water Supply System Performance [Volume 10, Issue 1, 2019, Page 72-82]

  • WEAP-MABIA Improving the Irrigation Systems for the Fallujah Irrigation Projects by Using Water Evaluation and Planning Model (WEAP) [Volume 14, Issue 2, 2023, Page 64-75]

  • WEAP-model Improving the Irrigation Systems for the Fallujah Irrigation Projects by Using Water Evaluation and Planning Model (WEAP) [Volume 14, Issue 2, 2023, Page 64-75]

  • Wind turbine Modeling and Performance of a Wind Turbine [Volume 1, Issue 1, 2008, Page 116-130]

  • Wing Theoretical and Experimental Study of a Forward Swept Wing [Volume 3, Issue 2, 2010, Page 15-30]

  • Winglet Vortex Generators Effect of Delta–Winglet Vortex Generators on a Forced Convection Heat Transfer in an Asymmetrically Heated Triangular Duct [Volume 1, Issue 1, 2008, Page 31-44]

  • WIP The Impact of Inventories on the Leanness of Job Shop Production System [Volume 10, Issue 2, 2019, Page 425-435]

  • WLAN and OPNET Simulator Performance Evaluation of AODV Routing Protocol in MANET using OPNET Simulator [Volume 5, Issue 2, 2012, Page 241-257]

  • WMAN Study of WMAN Physical Layer under Fading Channels [Volume 7, Issue 1, 2016, Page 21-31]

  • Work -In -Process The Impact of Inventories on the Leanness of Job Shop Production System [Volume 10, Issue 2, 2019, Page 425-435]

  • Workspace Kinematic Workspace Modelling of Two Links Robotic Manipulator [Volume 11, Issue 1, 2020, Page 19-24]