Since FGM orthotropic structures have such striking qualities as high strength, exceptional stiffness, stiffness-to-weight ratio, reduced cost, and high strength-to-weight ratio, they are employed extensively in the mechanical, aerospace, and civil engineering sectors. Thick plates and shells have more noticeable shear deformation effects. Therefore, in recent years, there has been a lot of interest in the vibration and buckling investigation of FGMs orthotropic plates and shells. Moreover, researchers have developed a variety of approaches and procedures for the examination of orthotropic FGM plates and shells. The majority of the literature review in this publication is focused on orthotropic FGMs plate and shell buckling and linear and nonlinear free vibration. In engineering practices, it is customary to use material-oriented or orthotropic materials in several domains to optimize the structures and maximize material properties, which is especially crucial for FG constructions. Solutions for the orthotropic FGM structure are studied analytically and numerically with different plate and shell theories.
In most cases, the concrete wall panels are subjected to axial eccentric distributed loading; due to this type of loading, concrete wall panels behave and fail somehow. There are many parameters that affect the structural behavior of the concrete wall panels. This study presents experimental investigation the structural behavior of concrete wall panels subjected to axial eccentric distributed loading; also evaluates the effect of the parameters, slenderness ratio (H/t), aspect ratio (H/L) and concrete strength on the behavior of concrete wall panels. The experimental program includes testing fifteen concrete wall panels hinged at top and bottom with free sides, by applying the load axially with eccentricity equal to (t/6); these panels are divided into five groups, each group consists of three panels with slenderness ratio (H/t) equals to (20 , 25 , 30) for each panel, three groups of normal concrete strength with aspect ratio (H/L) equal to (1.0 , 1.5 . 2.0) for each group and the other two groups are of high strength concrete with aspect ratio (H/L) equal to 2.0 for both two groups. The deflections of concrete wall panels depend on the slenderness ratio (H/t), aspect ratio (H/L) and concrete strength. The failure mode of the concrete wall panels is greatly affected by the aspect ratio (H/L); the panels with low aspect ratio tend to fail by crushing, while panels with high aspect ratio tends to fail by buckling.
The concrete members several blessings over steel beam, like high resistance to prominent tem-perature, higher resistance to fatigue and buckling, high resistance to thermal shock, fire re-sistance, robust resistance against, and explosion. However there are some disadvantages as a result of exploitation totally different materials to product it. The most downside of structural concrete member is its deprived the strength to tensile stresses.The bond mechanism between steel bars and concrete is thought to be influenced by multiple parameters, like the strength of the encompassing media, the prevalence of cacophonous cracks within the concrete and therefore the yield stress of the reinforcement. However, properties of concrete mass has significantly effect when it was subjected to elevated temperature.The objective of this paper presents the results that allocating with the bond behavior of the rein-forcement of steel bar systems below static pull-out loading tests subjected to elevated tempera-tures. This numerical technique relies on relative slip and therefore the stress of bond distribu-tions done the embedded length and size of the bar within the concrete cylinder specimens. The obtained results square measure given and commented with the elemental characteristics of ferroconcrete members. The comparison showed smart agreement with experimental results