A numerical study regarding stress, strain, and deflection of a composite plate is presented. The plate, consisting of three layers of Carbon-, Boron-, and Graphite-Epoxy, was fixed at one end and loaded at the other end in a conventional cantilever configuration. Six arrangements were examined and the spatial distribution of stress, strain, and deflection of the upper surface were calculated. Generally, it was found that the order, by which the three layers are arranged, has a great effect on the response of the plate and the maximum stiffness (in terms of deflection) is achieved when using Epoxy with Graphite-Carbon-Boron as the top-central-bottom layers of the plate.
A finite element method for free vibration analysis of generally laminated composite plateswith central crack and clamped edges have been studied using ANSYS 5.4 program. The fiber-reinforced composite materials are ideal for structural applications where highstrength-to-weight and stiffness-to-weight ratios are required, where structures must safelywork during its service life. But damages initiate a breakdown period on the structures.Cracks are among the most encountered damage types in the structures. The non-dimensionalfundamental frequency of vibration decreases with presence of cracks because, therigidity of cracked plate decreases. The natural frequency of plates depends on size andshape of the cracks, the effect of number of layers is found to be insignificant beyond fourlayers and the change of fiber orientation increasing the fundamental frequency of vibration.The results obtained have been compared with the available published literature with goodagreement results
This paper deals with the transient interlaminar thermal stress analysis of angle-ply SIC/LAS composite cantilever plate due to sudden change in the thermal boundary conditions .The transient interlaminar thermal stresses are computed by using the finite element method for different intervals of time. The effects of the fiber volume fraction, fiber orientation angle and stacking sequence are studied. The results are compared with previous studies with a good agreement
This research presents an experimental and theoretical investigation of the effect of cutouts on the stress and strain of composite laminate plates subjected to static loads. The experimental program covers measurement of the normal strain at the edges of circular and square holes with different number of layers and types of composite materials by using strain gages technique under constant tensile loads. A numerical investigation has been achieved by using the software package (ANSYS), involving static analysis of symmetric square plates with different types of cutouts. The numerical results include the parametric effects of lamination angle, hole dimensions, types of hole and the number of layers of a symmetric square plate. The experimental results show good agreement compared with numerical results. It is found that increasing the number of layers reduces the value of normal strain at the edges of circular and square holes of a symmetric plate and the maximum value of stress occurs at a lamination angle of (30o) and the maximum value of strain occurs at a lamination angle of (50o) for the symmetric square plates subjected to uni-axial applied load. The hole dimensions to width of plates ratio is found to increase the maximum value of stress and strain of a symmetric square plate subjected to uniaxial applied load. Moreover, the value of maximum stress increases with the order of type of circular, square, triangular and hexagonal cutout, whereas the value of maximum strain increases with the order of type of circular, square, hexagonal and triangular cutout.
The aim of current work is to investigate the tensioned composite plates with two types of cutouts. Many industrial applications use composite matrix with reinforcement fiber to obtain better properties. The objective of this work is divided into two parts, first the experimental work covers the measuring of the normal strain (εx) at the edges of (circular & square) holes that are perpendicular to the direction of the applied loads with different number of layers and types of cutouts of composite materials by using strain gages technique under constant tensile loads to compare with the numerical results. The second part is numerical work, which involves studying the static analysis of symmetric square plates with different types of cutout (circular – square). In static analysis, the effect of the following design parameters on the maximum stress (σx), strain (εx) and deflection (Ux) is studied. This part of investigation was achieved by using the software finite element package (ANSYS 5.4).
The Cooper-Harper rating of aircraft handling qualities has been adopted as a standard for measuring the performance of aircraft. In the present work, the tail plane design for satisfying longitudinal handling qualities has been investigated with different tail design for two flight conditions based on the Shomber and Gertsen method. Tail plane design is considered as the tail/wing area ratio. Parameters most affecting on the aircraft stability derivative is the tail/wing area ratio. The longitudinal handling qualities criteria were introduced in the mathematical contributions of stability derivative. This design technique has been applied to the Paris Jet; MS 760 Morane-Sualnier aircraft. The results show that when the tail/wing area ratio increases the aircraft stability derivative increases, the damping ratio and the natural frequency increases and the aircraft stability is improved. Three regions of flight conditions had been presented which are satisfactory, acceptable and unacceptable. The optimum tail/wing area ratio satisfying the longitudinal handling qualities and stability is (0.025KeywordsLongitudinal Handling---Stability---Tail Design