The reducing of heat gain through the outer walls of the buildings in summer will contribute in reducing the air conditioning costs. This is one of the best features of design requirements nowadays. To achieve this, the phase change materials (PCM) can be used as an embedded material in the walls to reduce heat transfer. The paraffin wax is one of the common materials used as a PCM in the building walls. The paraffin wax is used in this study with (20%) volume percentage in the external layer of the treated wall. In the present work, the treated wall (with embedded wax in the wall) and non-treated walls have been experimentally investigated. Two Iraqi wall models were employed to run the experiments, whereby these models were exposed to an external heat source using (1000 W) projector for each model. The temperatures were recorded at different locations in the walls during the charging and discharging periods. The results showed that the temperature of the internal surface for the treated wall was lower than that of the non-treated wall at the end of the discharging period (6 hr) where the temperature difference between the treated and non-treated walls was reached (1.6℃).
Laminar natural convection heat transfer and fluid flow due to the heating from below at variable heat source length inside two dimensional enclosure has been analyzed numerically in this study. The enclosure has filled with air as a working fluid. The vertical inclined walls of the enclosure are maintained at lower temperature while the remaining walls are insulated. The value of Rayleigh number from (1x103 ≤ Ra ≤ 4x104), the inclination angle at (γ = 0o, 22.5o , 45o ) and dimensionless heat source length at ( S = 1 and 0.5 ). The continuity, momentum and energy equations have been applied to the enclosure and solved by using finite difference method. The results showing that the average Nusselt number increases with the increasing of the heating source length and decreases with the increasing in an inclination angle of the vertical walls.
This research work includes study of sound insulation property of concrete samples with different densities. This study intended to present a proposed empirical formula to determine the sound insulation of concrete walls using the ultrasonic instrument. Experimental tests on concrete samples were made using the ultrasonic instrument, the sound insulation of concrete walls calculated according to a proposed empirical formula made in this work. This formula takes into consideration pulse velocity, wall width, and frequency .This formula is supported on a statistical criteria. The results are evaluated and compared with the values that computed using the most well-known formula, the comparison show compatibility of the results with tolerance of (3%).
This paper describes a numerical method for calculating the temperature distribution and latent heat storage (LHS) in the treated wall (TW) and non-treated wall (NTW). The developed method was assumed that the outer cement layer (Iraqi wall) enveloping the external wall of building and houses are contains paraffin wax as a phase change material (PCM). (25%) is the volume percentage of paraffin wax is mixed with cement which forming a treated layer. A comparison results between the (TW) and (NTW) has been done. The paper presents a simple calculation of case study for air-conditioning in two walls type of residential building. The outer solar air temperatures as function of day time are considered for a hot day in summer (July) for Baghdad city. The aim of this paper was to obtain physical validation of the numerical results produced from using developed FORTRAN program. This validation was obtained through a comparison of numerical solution of two different wall compositions exposed to the same external and internal load conditions. The calculations on transient heat transmissions across different walls were conducted. It was found that when using the (TW) with (PCM) produces lower surface and heat flux towards the cooling space with respect to (NTW).
The object of this paper was determined the thermal behavior of present and future constructs Iraqi walls at Baghdad climate region (Latitude 33.2 °N) with or without (40) mm insulating materials. The study was carried out at day (21) July for East Orientation. The obtained results were tabulated in terms of over all heat transfer coefficient, weight of the wall per unit area, wall thickness, temperature difference between outside and inside wall face and the temperature difference between inside of the room and it's inside wall surface through on. day hours and it's average values.
An experimental investigation is performed to study the friction factor ( f ) and convection heat transfer coefficient (h) behavior in an asymmetrically heated equilateral triangular duct by using delta–winglets vortex generators which are embedded in a turbulent boundary layer. Two side walls of the heated test section are electrically heated with a constant heat flux, whereas the lower wall is indirectly heated. Reynolds number (Re) is ranged from (23,000) to (58,000). Two sizes and three attack angles of vortex generators are studied here for three cases; single, double, and treble pairs of generators. Each pair was supported in one wall of the test section at the various locations from the leading edge. The indicated results that friction factor ( f )and Nusselt number (Nu) are relatively proportion with the size, number and the inclination angle of the generators. The ( f ) decreases as airflow rate increases whereas Nu number increases. The present data of ( f ) is less than the data of Chegini by about (6.5 %) and overpredicts the data of Altemani by about (1.7 %).
This article presents a numerical study on forced convection of nanofluid flow in a two-dimensional channel with trapezoidal baffles. One baffle mounted on the top wall of channel and another mounted on the bottom wall of channel. The governing continuity, momentum and energy equations in body-fitted coordinates are iteratively solved using finite volume method and SIMPLE technique. In the current study, SiO2-water nanofluid with nanoparticles volume fraction range of 0- 0.04 and nanoparticles diameters of 30 nm is considered for Reynolds number ranging from 100 to 1000. The effect of baffles height and location, nanopar-ticles volume fraction and Reynolds number on the flow and thermal fields are investigated. It is found that the average Nusselt number as well as thermal hydraulic performance increases with increasing nanopartiles volume fraction and baffle height but accompanied by increases the pressure drop. The results also show that the best thermal- hydraulic performance is obtained at baffle height of 0.3 mm, locations of baffles at upper and lower walls of 10 and 15 mm, respectively, and nanoparticles volume fraction of 0.04 over the ranges of Reynolds number.