A Numerical study has been conducted to clarify the effect of the buoyancy forces on the thermal development through a horizontal annulus sector heated with constant surface temperature. The study includes the solution of governing equations for the flow and heat transfer of different sections along the channel. Theoretically these governing equations were reduced to four, which are continuity equation, radial and tangential momentum equations, axial momentum equation and vorticity equation in which the variables were the temperature, vorticity, stream function and axial velocity. These equations were reduced to dimensionless equations in which Rayleigh, Prandtl and Reynolds numbers were presented. They were numerically solved by using the marching process explicit finite difference method and Gauss elimination technique. Numerical results for annulus sector heated by constant surface temperature for different values of Rayleigh numbers and total sector angles and diameters ratio were obtained and represented by stream function contours and isotherms and circumferential distribution of local Nusselt number. Also the results include the values of friction factor and average Nusselt number for the pure forced convection. Comparisons are made between the computed results and the analytical or numerical results available in the literature, for all cases compared, satisfactory agreement is obtained. The results include a survey of annulus sector surface in many sites of channel flow, whereas it is apparent that the buoyancy force causes the secondary flow to behave non uniformly at the entrance and then the average heat transfer will increase with the increasing both of diameter ratio and total annulus sector angles. A correlation relationship is extracted to find an average change of Nusselt after the stability of the flow in the fully developed region for the studied ranges of annulus sector angles and diameters ratio.
This research presents an experimental and theoretical investigation of the effect of cutouts on the stress and strain of composite laminate plates subjected to static loads. The experimental program covers measurement of the normal strain at the edges of circular and square holes with different number of layers and types of composite materials by using strain gages technique under constant tensile loads. A numerical investigation has been achieved by using the software package (ANSYS), involving static analysis of symmetric square plates with different types of cutouts. The numerical results include the parametric effects of lamination angle, hole dimensions, types of hole and the number of layers of a symmetric square plate. The experimental results show good agreement compared with numerical results. It is found that increasing the number of layers reduces the value of normal strain at the edges of circular and square holes of a symmetric plate and the maximum value of stress occurs at a lamination angle of (30o) and the maximum value of strain occurs at a lamination angle of (50o) for the symmetric square plates subjected to uni-axial applied load. The hole dimensions to width of plates ratio is found to increase the maximum value of stress and strain of a symmetric square plate subjected to uniaxial applied load. Moreover, the value of maximum stress increases with the order of type of circular, square, triangular and hexagonal cutout, whereas the value of maximum strain increases with the order of type of circular, square, hexagonal and triangular cutout.
Recently, the investigations studies of simulating flow over spillways have increased using numerical models. Due to its important structure in the dams to pass flood wave to the downstream safely. Researches finding have shown that CFD (Computational fluid dynamics) models as the numerical method are a perfect alternative for laboratory tests. Performance analysis of the CFD platforms Ansys Fluent-2D and Flow-3D are presented, focus on finding the variations between the numerical results of the two programs to simulate the flow over ogee spillway. The present study treats the turbulence using RNG k-ε of RANS approach, and also use the Volume of Fluid (VOF) algorithm to track the water-air interaction. The Fluent-2D and Flow-3D accuracy are assessed by comparing representative flows variables (velocity; free surface profiles; pressure; and the turbulent kinetic energy). The results of both codes have been also compared with experimental data. The results of the analysis show an excellent agreement between the two platforms data, which could assist in the future by using both programs to calibrate each other, rather than traditionally relying on laboratory calibration models.
The aim of current work is to investigate the tensioned composite plates with two types of cutouts. Many industrial applications use composite matrix with reinforcement fiber to obtain better properties. The objective of this work is divided into two parts, first the experimental work covers the measuring of the normal strain (εx) at the edges of (circular & square) holes that are perpendicular to the direction of the applied loads with different number of layers and types of cutouts of composite materials by using strain gages technique under constant tensile loads to compare with the numerical results. The second part is numerical work, which involves studying the static analysis of symmetric square plates with different types of cutout (circular – square). In static analysis, the effect of the following design parameters on the maximum stress (σx), strain (εx) and deflection (Ux) is studied. This part of investigation was achieved by using the software finite element package (ANSYS 5.4).
In this study, thermal-hydraulic performance of a confined slot jet impingement with Al2O3-water nanofluid has been numerically investigated over Reynolds number ranges of 100-1000. Two triangular ribs are mounted at a heated target wall; one rib located on the right side of the stagnation point and another one located on left side of the stagnation point. The governing momentum, continuity and energy equations in the body-fitted coordinates terms are solved using the finite volume method and determined iteratively based on SIMPLE algorithm. In this study, effects of Reynolds number, rib height and rib location on the thermal and flow characteristics have been displayed and discussed. Numerical results show an increase in the average Nusselt number and pressure drop when Reynolds number and rib height increases. In addition, the pressure drop and average Nusselt number increases with decrease the space between the stagnation point and rib. The maximum enhancement of the average Nusselt number is up to 39 % at Reynolds number of 1000, the rib height of 0.3, rib location of 2 and nanoparticles volume fraction of 4%. The best thermal-hydraulic performance of the impinging jet can be obtained when the rib height of 0.2 and rib location of 2 from the stagnation point with 4% nanoparticles volume fraction.
Viscoelasticity, as its name implies, is a generalization of elasticity and viscosity. Many industrial applications use viscoelastic matrix with reinforcement fiber to obtained better properties. Tensile testing of matrix and one types of fabric polyamide composites was performed at various loading rates ranging from (8.16* 10-5 to 11.66 * 10-5 m/sec) using a servohydraulic testing apparatus. The kind of reinforcement, random glass fiber (RGF), and the kind of matrix, epoxy (E) are used shown that the linear strain (،ـ 0.5) for the three parameter model gives a good agreement with experimental results. The results showed that both tensile strength and failure strain of these matrices and composites tend to decrease with increase of strain rate. The experimental results were comparison with numerical results by using ANSYS 5.4 program for simple study case has shown some agreement. Fracture regions of the tested specimens were also observed to study micro mechanisms of tensile failure.
This investigation provides experimental results and nonlinear analysis by using finite element model of thick hollow core slab made from recycled lightweight material. Four hollow core slabs specimens were cast and tested in this investigation with dimensions (1200mm length, 450mm width and 250mm thickness). The crushed clay brick was used as a coarse aggregate instead of gravel. The iron powder waste and silica fume were used in order to increase the compressive strength of concrete. The techniques reduction hollow length and use shear reinforcement were used to improve shear strength and avoid shear failure. The specimens were tested by applying two-line load up to failure. The experimental results were showed these techniques were resisted the shear failure significantly and works to change failure mode from shear to flexural failure. Finite element computer software program (ANSYS) was used to analysis hollow core slabs specimens and compare the experimental results with the theoretical results. Good agreement have been obtained between experimental and numerical results.
A numerical investigation of mixed convection from a horizontal cylinder in a saturated porous medium is presented. The governing equations based on Darcy’s law are expressed in a body- fitted coordinate system and solved numerically by explicit method. The direction of the flow varies between the vertically up ward(assisting flow) and vertically downward(opposing flow). Results are presented for Reynolds number Re from 10 to 100 with Grashof numbers up to Gr =5Re. The Prandtl number was kept at a constant value of 0.7. results are presented for the streamlines and isotherms as well as the local and average Nusselt number at different values of governing parameters. Comparison with previous theoretical results show good agreement.
This paper presents an analytical investigation which includes the use of three dimensional nonlinear finite elements to model the performance of the space trusses by using (ANSYS 11.0) computer program. The numerical results show very good agreement (100%) with experimental results, while the graphical option reflects the behavior of the structure under the applied loads because of the ability of this option to simulate the real behavior of the structure under these loads. Also finite element models of the space truss simulate the lateral deflection of the top chord members especially at the corners, and the twisting of the bottom chords.
This paper describes a numerical method for calculating the temperature distribution and latent heat storage (LHS) in the treated wall (TW) and non-treated wall (NTW). The developed method was assumed that the outer cement layer (Iraqi wall) enveloping the external wall of building and houses are contains paraffin wax as a phase change material (PCM). (25%) is the volume percentage of paraffin wax is mixed with cement which forming a treated layer. A comparison results between the (TW) and (NTW) has been done. The paper presents a simple calculation of case study for air-conditioning in two walls type of residential building. The outer solar air temperatures as function of day time are considered for a hot day in summer (July) for Baghdad city. The aim of this paper was to obtain physical validation of the numerical results produced from using developed FORTRAN program. This validation was obtained through a comparison of numerical solution of two different wall compositions exposed to the same external and internal load conditions. The calculations on transient heat transmissions across different walls were conducted. It was found that when using the (TW) with (PCM) produces lower surface and heat flux towards the cooling space with respect to (NTW).